- Messages
- 757
- Reactions
- 2,041
Really dropped the ball on this one. It ran for a few days with the wrong price. Corrected. 
Here's an unusual take down AR-15. Fits in a standard 17" computer bag, as pictured.
Purpose built this for discrete transport of a full sized AR-15 carbine. I had entertained plans to get into executive protection, life went a different way.
Round count: less than 500. Just sight in and function check.
Lower receiver: Stag Arms with 2 stage FCG. Wilson springs. Very nice trigger.
Milspec heavy duty buffer tube with Magpul CSR stock. Grip is Magpul K2 grip. Single point sling ring endplate.
Upper receiver: MGI Monolithic. Bravo Company BCG: Nickle Boron finish. Rainer Arms "Raptor" ambi charging handle
Flip up irons by Yankee Hill Manufacturing. Co-witnessed with a Vortex SPARC II RDS on a QD mount.
BCM "stubby" VFG
Advanced Research Division Nitride barrel, Nitride Gas block, Nitride Flash hider. SS gas tube. 1/9 twist with a 5.56 chamber. 16".
Quick caliber change. Just a barrel swap with any caliber that uses the 5.56 bolt and magazine. Barrel and bolt for other calibers, for the most part. I did it with a 300BO but I haven't tried any other caliber.
Fits in any 17' briefcase or computer bag. This bag is not included. Maxpedition stopped making these so I have to keep it.
With a little practice, I've been able to go from bagged to putting rounds down range in 25 seconds. Not bad for a break down full sized carbine.
This is NOT the complete HYDRA system. Just the take down CQB-D upper.
Not a cheap "parts gun" all high quality and built for purpose components.
You can read about the MGI upper here. https://www.mgi-military.com/store/index.php?product_id=38&type=&category=19
This will be face to face at an FFL. I will not ship.
Edit: I'll take a Colt King Cobra in partial trade. But it has to be in near mint/LNIB condition.
Note: A portion of this sale will go to support NWFA.
Here's an unusual take down AR-15. Fits in a standard 17" computer bag, as pictured.
Purpose built this for discrete transport of a full sized AR-15 carbine. I had entertained plans to get into executive protection, life went a different way.
Round count: less than 500. Just sight in and function check.
Lower receiver: Stag Arms with 2 stage FCG. Wilson springs. Very nice trigger.
Milspec heavy duty buffer tube with Magpul CSR stock. Grip is Magpul K2 grip. Single point sling ring endplate.
Upper receiver: MGI Monolithic. Bravo Company BCG: Nickle Boron finish. Rainer Arms "Raptor" ambi charging handle
Flip up irons by Yankee Hill Manufacturing. Co-witnessed with a Vortex SPARC II RDS on a QD mount.
BCM "stubby" VFG
Advanced Research Division Nitride barrel, Nitride Gas block, Nitride Flash hider. SS gas tube. 1/9 twist with a 5.56 chamber. 16".
Quick caliber change. Just a barrel swap with any caliber that uses the 5.56 bolt and magazine. Barrel and bolt for other calibers, for the most part. I did it with a 300BO but I haven't tried any other caliber.
Fits in any 17' briefcase or computer bag. This bag is not included. Maxpedition stopped making these so I have to keep it.
With a little practice, I've been able to go from bagged to putting rounds down range in 25 seconds. Not bad for a break down full sized carbine.
This is NOT the complete HYDRA system. Just the take down CQB-D upper.
Not a cheap "parts gun" all high quality and built for purpose components.
You can read about the MGI upper here. https://www.mgi-military.com/store/index.php?product_id=38&type=&category=19
This will be face to face at an FFL. I will not ship.
Edit: I'll take a Colt King Cobra in partial trade. But it has to be in near mint/LNIB condition.
Note: A portion of this sale will go to support NWFA.
Last Edited:
