- Messages
- 248
- Reactions
- 25
The perfect deal for benchrest or mid-range varmint shooters!
(Not a good rifle for beginners, new to shooting or match reloading... really)
This rifle, originally built by H&S Precision, is based on a Stolle Panda, right port, left bolt, "glue-in" action and chambered in "tight neck" 6PPC.
Trigger is a Jewell 3/4 oz BR. Stock is a modified H&S Carbon Kevlar... paint is blue metallic with "floating skulls" on both sides of the butt. This is a match legal, 10.5 lb. LV rifle.
Leupold 36X BR optic and Jewell rings are not included.
There are two barrels: One is a H&S 10X, cut rifled, 13.5 twist, fluted barrel with 1035 shots fired thru it... still very accurate with a best of .063" 5 shot group at 100 yds. This barrel has been re-crowned and re-chambered by Speedy Gonzales and has not been fired since.
The second barrel is a brand new, cut rifled, 13.0 twist, un-fired, cryo'd Krieger.
Both barrels were fit, finished and chambered by Speedy Gonzales using the same chambering and finishing reamers... so both barrels can be used with the same cases/loads. One for practice, one for competition.
Both barrels are custom, .262" "tight neck" chambers and will not accept factory "6PPC USA" loaded ammunition. Both barrels have the SG&Y "spyderweb" finish. Both barrels are 416R stainless, benchrest contour barrels.
Either barrel can be rechambered to accept 6PPC USA, or with a minor modification, any number of cartridges in the .473" bolt face catagory could be used including 6BR and 6XC.
Included are: Wilson and other 6PPC dies including a Harrell bump die, Berger bullets, delrin loading blocks, 6PPC specific case tools, Lapua .220 Russian cases ready for machining and fire-forming.
Also, some VV N133 propellant and 205M primers. Basically, if it's 6PPC specific, you get it.
Rifle, Pelican hard case, loading components and accessories: $1500 FTF in the PNW.
More interested in trades than cash. The bags and front rest are not included and not for sale.
Possible trades are: AR-15 - .223 or .308. Valmet/Galil .308, FN-FAL, SIG AMT, H&K 91, Benelli M1 Super 90, Benelli Practical, Benelli M4, Beretta 1201FP, .22 match pistols... combinations of above.
Thanks for lookin'
C
(Not a good rifle for beginners, new to shooting or match reloading... really)
This rifle, originally built by H&S Precision, is based on a Stolle Panda, right port, left bolt, "glue-in" action and chambered in "tight neck" 6PPC.
Trigger is a Jewell 3/4 oz BR. Stock is a modified H&S Carbon Kevlar... paint is blue metallic with "floating skulls" on both sides of the butt. This is a match legal, 10.5 lb. LV rifle.
Leupold 36X BR optic and Jewell rings are not included.
There are two barrels: One is a H&S 10X, cut rifled, 13.5 twist, fluted barrel with 1035 shots fired thru it... still very accurate with a best of .063" 5 shot group at 100 yds. This barrel has been re-crowned and re-chambered by Speedy Gonzales and has not been fired since.
The second barrel is a brand new, cut rifled, 13.0 twist, un-fired, cryo'd Krieger.
Both barrels were fit, finished and chambered by Speedy Gonzales using the same chambering and finishing reamers... so both barrels can be used with the same cases/loads. One for practice, one for competition.
Both barrels are custom, .262" "tight neck" chambers and will not accept factory "6PPC USA" loaded ammunition. Both barrels have the SG&Y "spyderweb" finish. Both barrels are 416R stainless, benchrest contour barrels.
Either barrel can be rechambered to accept 6PPC USA, or with a minor modification, any number of cartridges in the .473" bolt face catagory could be used including 6BR and 6XC.
Included are: Wilson and other 6PPC dies including a Harrell bump die, Berger bullets, delrin loading blocks, 6PPC specific case tools, Lapua .220 Russian cases ready for machining and fire-forming.
Also, some VV N133 propellant and 205M primers. Basically, if it's 6PPC specific, you get it.
Rifle, Pelican hard case, loading components and accessories: $1500 FTF in the PNW.
More interested in trades than cash. The bags and front rest are not included and not for sale.
Possible trades are: AR-15 - .223 or .308. Valmet/Galil .308, FN-FAL, SIG AMT, H&K 91, Benelli M1 Super 90, Benelli Practical, Benelli M4, Beretta 1201FP, .22 match pistols... combinations of above.
Thanks for lookin'
C
Last Edited: