I started out making these for myself, then my shooting buddies started asking for them
you get the story. I am posting this to see what kind of interest there would be on NWF for me to spend a weekend building them for others.
The Details
10X12 ½ inch thick AR400 steel plate, target is about center mass in height. The rest is self explanatory from the photos. I have shot this plate with a 44mag & 7.62x39 with no damage.they do not spin, just deflect rounds down. 223 will put a small dent/pock mark in the steel but would take a long time to destroy.
I can build them out the door for around 80 bucks, (depending on steel prices +or- a few dollars)
Let me know if you would like one and depending on the response, I will make some more.
The Details
10X12 ½ inch thick AR400 steel plate, target is about center mass in height. The rest is self explanatory from the photos. I have shot this plate with a 44mag & 7.62x39 with no damage.they do not spin, just deflect rounds down. 223 will put a small dent/pock mark in the steel but would take a long time to destroy.
I can build them out the door for around 80 bucks, (depending on steel prices +or- a few dollars)
Let me know if you would like one and depending on the response, I will make some more.