- Messages
- 696
- Reactions
- 484
- Ad Type
- For Sale
- For Trade
- Price
- $3000
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- JBLM
- State
- Washington
New, only test fired when purchased at Atlus Shooting (see borescope photo)
- Defiance Machine Deviant Elite RH Rem Short Action
Extended Thread Tenon
Heavy Rear Tang
.308 (.473") Bolt Face
Standard Bolt Fluting
Elite Straight Bolt Handle
Tactical Bolt Knob
Remington Style Bolt Shroud
Small Diameter (.062") Firing Pin
30 MOA Scope Base
Defiance Target Length Ejection Port
AW Magazine Cut
DLC Finish
- Bartlein Cut Rifled SS 6 Creedmoor 26" Heavy Palma Barrel
.237"/.243" Bore/Groove Diameter
LH Gain Twist - 1:8.25" to 1:7.5"
5R Rifling
5/8x24 TPI Muzzle Threads
Graphite Black Cerakote Finish
- Huber 2 stage
- APA LB gen II .30cal
- Manners TF2a w/mini chassis (folding chassis) - The inlet has been professionally modified for a Kelbly Atlas action ...relief cut for a trigger hanger, slightly longer ejection port relief, clearance for the side bolt release. This doesn't affect the nesting of the defiance action with the mini chassis. Additionally, the stock itself was opened up forward of the recoil lug slot to accommodate the longer tenion of the elite action. 2x Flush cups on the driver side.
Asking $3100 shipped .... $3k FTF
Trades; Kestrel 5700 AB w/Link, TT Gen 2xr, RRS Harris Bipod adapter swivel or plate, Leica Geovid LRF binos
- Defiance Machine Deviant Elite RH Rem Short Action
Extended Thread Tenon
Heavy Rear Tang
.308 (.473") Bolt Face
Standard Bolt Fluting
Elite Straight Bolt Handle
Tactical Bolt Knob
Remington Style Bolt Shroud
Small Diameter (.062") Firing Pin
30 MOA Scope Base
Defiance Target Length Ejection Port
AW Magazine Cut
DLC Finish
- Bartlein Cut Rifled SS 6 Creedmoor 26" Heavy Palma Barrel
.237"/.243" Bore/Groove Diameter
LH Gain Twist - 1:8.25" to 1:7.5"
5R Rifling
5/8x24 TPI Muzzle Threads
Graphite Black Cerakote Finish
- Huber 2 stage
- APA LB gen II .30cal
- Manners TF2a w/mini chassis (folding chassis) - The inlet has been professionally modified for a Kelbly Atlas action ...relief cut for a trigger hanger, slightly longer ejection port relief, clearance for the side bolt release. This doesn't affect the nesting of the defiance action with the mini chassis. Additionally, the stock itself was opened up forward of the recoil lug slot to accommodate the longer tenion of the elite action. 2x Flush cups on the driver side.
Asking $3100 shipped .... $3k FTF
Trades; Kestrel 5700 AB w/Link, TT Gen 2xr, RRS Harris Bipod adapter swivel or plate, Leica Geovid LRF binos
