- Messages
- 82
- Reactions
- 17
SOLD Priced at $2100 / offer (NO LOW BALL OFFERS). Keep in mind this is a couple hundred below retail for the Dillon equipment already. Reloading setup for 9mm, .45acp, and .223. Most items are lightly used and remember the Dillon lifetime warranty. ***NOTE: Non-Dillon equipment in the pictures is no longer included - Dillon equipment only. Includes the following equipment:
XL650 Progressive Press (with shell plate bearing kit upgrade)
Strong Mount
Casefeed Assembly
Large Pistol, Small Pistol and Small Rifle Casefeed Plates
RT1200 Trimmer
.223 Trimmer die
Super Swage 600
.45acp Carbide Die Set
9mm Carbide Die Set
.223 CARBIDE Die Set (commercial grade)
9mm Stainless Case Gauge
.45acp Stainless Case Gauge
9mm Caliber Conversion
.45acp Caliber Conversion
.223 Caliber Conversion
Both full Primer ASSEMBLIES - Change primer sizes easily
Six small, Six large primer tubes (only show 4 small in pic but found a couple more.)
Three full quick change toolheads w/ powder measures
One "case prep" toolhead
One extra empty toolhead
Two new toolhead holders, two older ones.
Aluminum Bullet Tray
Toolholder w/ Wrench Set
Maintenance & Spare Parts Kit
Dillon DVD
Cash only if picking up. Available for PU in the Milwaukie, OR. / SE PDX area. If shipped buyer pays actual shipping & ins. Boxes are already packed, one measures 14 x 14 x 31 (Dillon xl 650 box) and weighs around 40# and $800 value (some other Dillon equipment inside).
The other is 18.5 x 18 x 16 and weighs around 60# and $1500 value. Shipping is from 97222 zip code so you should be able to get yourself a quote from FedEx with ins and delivery confirmation / buyer signature required. If shipping is more than your quote I'll absorb that and will refund if under.
USPS MO if shipped however I MAY accept PayPal but as a "gift" only AND only shipped to a PayPal verified buyers confirmed account / address.
Listed on multiple sites and subject to prior sale. Will not break up, package deal only. BEST WAY TO CONTACT IS VIA EMAIL. Thank you.
XL650 Progressive Press (with shell plate bearing kit upgrade)
Strong Mount
Casefeed Assembly
Large Pistol, Small Pistol and Small Rifle Casefeed Plates
RT1200 Trimmer
.223 Trimmer die
Super Swage 600
.45acp Carbide Die Set
9mm Carbide Die Set
.223 CARBIDE Die Set (commercial grade)
9mm Stainless Case Gauge
.45acp Stainless Case Gauge
9mm Caliber Conversion
.45acp Caliber Conversion
.223 Caliber Conversion
Both full Primer ASSEMBLIES - Change primer sizes easily
Six small, Six large primer tubes (only show 4 small in pic but found a couple more.)
Three full quick change toolheads w/ powder measures
One "case prep" toolhead
One extra empty toolhead
Two new toolhead holders, two older ones.
Aluminum Bullet Tray
Toolholder w/ Wrench Set
Maintenance & Spare Parts Kit
Dillon DVD
Cash only if picking up. Available for PU in the Milwaukie, OR. / SE PDX area. If shipped buyer pays actual shipping & ins. Boxes are already packed, one measures 14 x 14 x 31 (Dillon xl 650 box) and weighs around 40# and $800 value (some other Dillon equipment inside).
The other is 18.5 x 18 x 16 and weighs around 60# and $1500 value. Shipping is from 97222 zip code so you should be able to get yourself a quote from FedEx with ins and delivery confirmation / buyer signature required. If shipping is more than your quote I'll absorb that and will refund if under.
USPS MO if shipped however I MAY accept PayPal but as a "gift" only AND only shipped to a PayPal verified buyers confirmed account / address.
Listed on multiple sites and subject to prior sale. Will not break up, package deal only. BEST WAY TO CONTACT IS VIA EMAIL. Thank you.
Last Edited: