Show your guns!

[edzz]

Although, if I had any HS5, an old Lyman manual shows 115gr. SWC loads at 1100fps. Pretty snappy for the old gal. As it is, I'll have to settle for about 1000 fps with some coated 100 gr SWCs, or who knows(?) with some PPU 71 gr HPs.

Good luck finding HS-5, was my favorite 9mm powder till it was discontinued ~40 years ago forcing my conversion to Winchester 231.

 

[po18guy]

Good luck finding HS-5, was my favorite 9mm powder till it was discontinued ~40 years ago forcing my conversion to Winchester 231.

Ain't it the truth! One of the few powders I did not stock up on back then. Über conservative Lyman found the perfect powder for the 32 Long, as that is pushing on .38 Spl and even 9mm territory. The chambering to .32 H&R is tempting, as it will still fire both, plus the ancient .32 S&W if any of that even still exists.

 

[Delasangre4231]

Finally got a bipod! What do you think?

 

[tac]

Almost anything is an improvement on a monopod.

 

[RyanG90]

Newest member of the family. Canik TP9

 

[RyanG90]

Made some 300yd shots on my steel spinner yesterday!

 

[Old Noob]

New "retro" build.

 

[Delasangre4231]

Got these guys out for some range time and sighting in. Decided I wanted to go back to iron sights and sold off my red dots.

 

[barnabus1999]

Complete 6 month project.
Can and sbr next.
Colt Trijicon FN Benchmade

 

[Anonymous 510]

 

[drewp]

finished up another ak build, I'll parkerize it after test fire.

 

[drewp]

also just finished a saiga 556 conversion...the right way.
.no bolt on crap...all extra holes welded up, uses galil mags now.
before and after.

 

[supersixone]

Cz Scorpion Urban Grey custom Scorpion Camo

 

[supersixone]

M16 tribute

 

[token3495]

 

[buffalow]

Ready !

 

[Mr Smith]

Finished the 9mm build a few months ago. Finally got around to snapping a couple pics

 

[Jason999]

Picked up my W.H Davenport Acme, model 1896, 12 gauge today. Built between 1897 and 1900.

It's just a wall hanger, but I'm still going to refinish the stock and reblue it. Looks like the recessed portion of the frame, that the barrels hinge is under, is chipped and a piece of metal was bolted to it. I may leave this "farmer repair", as I'm not planning on shooting this, it adds character.

 

[barnabus1999]

Winchester 1961
Henry
30-30s

 

[Ducati_Meister]

Added the Benelli M4 shotgun finally. Not cheap, but I always saw it as a "holy grail" type of gun for my collection. My LGS had a few, so I got one as lord knows how hard they can be to find. This gun has the full mag tube and retractable stock with night sight ghost ring sights from the factory.