Should I bother?….HiPoint mill work.

[Yarome]

The photos just point to the manufacturing process. There is no wearing from my range trim. That’s how it looks coming off factory line.

Wow. I stand corrected. I wasn't aware they do their powder coating BEFORE going in with a grinder to clean up the slide.

Very odd, indeed.

 

[NobullSKS]

Hi poinr will warranty it

Yup, if I had a problem. This post wasn’t intended to expose a fault. Just inside finish of a $225 MSRP Yeti Cannon

 

[Flopsweat]

If you're going to improve the trigger, I say give it the full fluff & buff while you're in there. Make it a surprisingly smooth gun, soften all of the sharp edges and enjoy watching people notice or not notice. And really just get rid of that pot metal trigger. I'm sure there's a steel aftermarket version somewhere.

 

[Nosferatu]

They are die cast or injection molded zinc alloy, zomak or something like that.

Even better. It will take a lot less propane to reshape.

 

[NobullSKS]

If you're going to improve the trigger, I say give it the full fluff & buff while you're in there. Make it a surprisingly smooth gun, soften all of the sharp edges and enjoy watching people notice or not notice. And really just get rid of that pot metal trigger. I'm sure there's a steel aftermarket version somewhere.

It’s actually plastic that’s why I’m confident JB weld would work great. Just want to fill in the space they have so I can remove material from the face without weakening the whole thing. Some weird circular pad on finger surface. File it down so it’s like a normal trigger surface. Like the width of it. It’s not comfortable at all.
Yeah I’ll check M-Carbo as well. Haaa, if they have a spring kit or trigger kit…. I’m on it. May only be able to drop that in the suggestion box though.

 

[Flopsweat]

It’s actually plastic that’s why I’m confident JB weld would work great. Just want to fill in the space they have so I can remove material from the face without weakening the whole thing. Some weird circular pad on finger surface. File it down so it’s like a normal trigger surface. Like the width of it. It’s not comfortable at all.
Yeah I’ll check M-Carbo as well. Haaa, if they have a spring kit or trigger kit…. I’m on it. May only be able to drop that in the suggestion box though.

View attachment 1360800

MCarbo has a spring kit.

Hi Point CF 380 / C9 / JCP 40 / JHP 45 Trigger Spring Kit

Best Hi Point C9 Trigger Job to Improve Performance! Works for all Hi Point Pistols C9, JCP 40, JHP 45, CF 380. M*CARBO Hi Point C9 Aftermarket Trigger Mod to Reduce the Hi Point C9 Trigger Pull.

www.mcarbo.com

I don't think anyone makes a trigger for it. You can still either polish the sear with 600 grit or dry fire it a bunch before you lighten the springs.

 

[arakboss]

MCarbo has a spring kit.

Hi Point CF 380 / C9 / JCP 40 / JHP 45 Trigger Spring Kit

Best Hi Point C9 Trigger Job to Improve Performance! Works for all Hi Point Pistols C9, JCP 40, JHP 45, CF 380. M*CARBO Hi Point C9 Aftermarket Trigger Mod to Reduce the Hi Point C9 Trigger Pull.

www.mcarbo.com

I don't think anyone makes a trigger for it. You can still either polish the sear with 600 grit or dry fire it a bunch before you lighten the springs.

 

[NobullSKS]

MCarbo has a spring kit.

Hi Point CF 380 / C9 / JCP 40 / JHP 45 Trigger Spring Kit

Best Hi Point C9 Trigger Job to Improve Performance! Works for all Hi Point Pistols C9, JCP 40, JHP 45, CF 380. M*CARBO Hi Point C9 Aftermarket Trigger Mod to Reduce the Hi Point C9 Trigger Pull.

www.mcarbo.com

I don't think anyone makes a trigger for it. You can still either polish the sear with 600 grit or dry fire it a bunch before you lighten the springs.

Geeze I didn’t have time to check…… I’m in shock. Thx for looking…. Haaaaaa guess I have to get it now.
I’m gonna have to start a HiPoint “build” thread now. Heck I’ll just be master HiPoint smith now. I’ve already been called toilet master.

 

[Flopsweat]

Geeze I didn’t have time to check…… I’m in shock. Thx for looking…. Haaaaaa guess I have to get it now.
I’m gonna have to start a HiPoint “build” thread now. Heck I’ll just be master HiPoint smith now. I’ve already been called toilet master.

No reason you can't be both.

 

[NobullSKS]

MCarbo has a spring kit.

Hi Point CF 380 / C9 / JCP 40 / JHP 45 Trigger Spring Kit

Best Hi Point C9 Trigger Job to Improve Performance! Works for all Hi Point Pistols C9, JCP 40, JHP 45, CF 380. M*CARBO Hi Point C9 Aftermarket Trigger Mod to Reduce the Hi Point C9 Trigger Pull.

www.mcarbo.com

I don't think anyone makes a trigger for it. You can still either polish the sear with 600 grit or dry fire it a bunch before you lighten the springs.

I have a trigger polishg kit. From mcarbo actually.

 

[Mike_M57]

You should engrave "Billy the Kid" on the slide and drop it into the pit on Oak Island when no one is looking.

Could be entertaining.

 

[Poopy]

You can unlock the hi points full potential with just a tad bit of work .

 

[Nosferatu]

You can unlock the hi points full potential with just a tad bit of work .

Where did they find a top-mount for the red dot? I thought they all mounted to the sides of the slide on a Hi-Point.

Good thing he got the riser though. Should be good to 500 yards now.

 

[NobullSKS]

Where did they find a top-mount for the red dot? I thought they all mounted to the sides of the slide on a Hi-Point.

Good thing he got the riser though. Should be good to 500 yards now.

This new line of models are “optic ready” I haven’t removed rear sight but looks like 2 screws on top

 

[Flopsweat]

You can unlock the hi points full potential with just a tad bit of work .

I'm not comfortable spending $4300 with someone who can't even pronounce "proprietary".

 

[Ducati_Meister]

Pimp it out with gold and silver accents and high polish etc. Lol

 

[Ducati_Meister]

Maybe add some steam punk looks if that strikes your fancy lol

 

[NobullSKS]

Maybe add some steam punk looks if that strikes your fancy lol

View attachment 1364725

Not bad….