Gold Supporter
- Messages
- 24,546
- Reactions
- 37,220
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'd buy it…..A small scale , as in 20 inch barreled Mauser 98k in 7.62x39mm
Full on 98k in styling...just smaller and in a different caliber.
That might be a fun carbine.
Andy
Spark that creative in you.A Roth-Steyr in 9x19
Basically my ideas are all sacrilegious clones of historical firearms in commonly available calibers
I had this idea of mounting an AR15 with 22lr conversion kit to the bottom rail of a longer AR15, using a couple of these pieces:A double rifle in a mainstream caliber for under 2k$
Oh, now that has possibilities!I had this idea of mounting an AR15 with 22lr conversion kit to the bottom rail of a longer AR15, using a couple of these pieces:
View attachment 1081328
One side of these mounts would attach to the bottom rail on the main firearm and then the other side would attach to the picatinny rail on upper receiver of secondary firearm. The pistol grip of the secondary firearm would act as a forward vertical grip for the main firearm. The secondary firearm would have no buffer tube installed.
Very cool stock finish.I built this
View attachment 1081807
Savage MKII FVT with a Mueller 4.5-14X mil dot scope. for plinking.
Nice!Integral rear flip-up sight. Springs and followers (2) in bored holes under the rail slots. Roller detent in broached recess under last rail. Windage adjusts with standard front post elevation tool. Torq patch on windage screw threads + wave washers. First finish didn't hold up well, so it's back to raw.
View attachment 1081848
Is elevation all done with front sight?Integral rear flip-up sight. Springs and followers (2) in bored holes under the rail slots. Roller detent in broached recess under last rail. Windage adjusts with standard front post elevation tool. Torq patch on windage screw threads + wave washers. First finish didn't hold up well, so it's back to raw.
View attachment 1081848