S&W 642-1 (pre-lock) .38 airweight snub

Discussion in 'Handgun Classifieds' started by PhysicsGuy, May 12, 2010.

Thread Status:
Not open for further replies.
  1. PhysicsGuy

    PhysicsGuy
    Corvallis, OR
    Resident Science Nut

    Messages:
    4,134
    Likes Received:
    158
    S&W 642-1 airweight in .38 special, good shape, left side shows little to no wear, right side has "scroll marks" on the side plate (I dont have a pic of that side at the moment). This gun has no lock, and is not one of the new "no lock" 642s. Also has the factory box, and papers. And this has a slightly lighter trigger spring installed, but the factory spring will be included as well. $375 now $350


    076.jpg

    the "bad" side
    IMG_0015.jpg
    IMG_0016.jpg
     
  2. 2gr8dgs

    2gr8dgs
    oregon
    Active Member

    Messages:
    440
    Likes Received:
    81
    I can't tell from the pic, Is this 642 rated for + P loads?
     
  3. PhysicsGuy

    PhysicsGuy
    Corvallis, OR
    Resident Science Nut

    Messages:
    4,134
    Likes Received:
    158
    The manual does not specify +p loads, but S&W claims that the current 642's are rated for +P loads, so I would assume so. (although it won't be too comfortable :D)
     
  4. elsullo

    elsullo
    Portland Oregon
    New Member

    Messages:
    1,199
    Likes Received:
    53

    From their very first introduction the 642 was rated for +P, and originally had this stamped on the barrel. I held one of the very first ones to reach Portland way back when, and regretably did not buy it.....................elsullo :(
     
  5. moontribe

    moontribe
    PDX
    Member

    Messages:
    33
    Likes Received:
    0
    Pm sent
     
  6. PhysicsGuy

    PhysicsGuy
    Corvallis, OR
    Resident Science Nut

    Messages:
    4,134
    Likes Received:
    158
    Btt $350
     
  7. PhysicsGuy

    PhysicsGuy
    Corvallis, OR
    Resident Science Nut

    Messages:
    4,134
    Likes Received:
    158
    Back to top
     
  8. bdb benzino

    bdb benzino
    Albany OR
    Member

    Messages:
    116
    Likes Received:
    8
    Looking for trades at all?
     
  9. PhysicsGuy

    PhysicsGuy
    Corvallis, OR
    Resident Science Nut

    Messages:
    4,134
    Likes Received:
    158
    Well the only things I really "need" at the moment are;

    AR FDE MIAD grip
    AR CTR or MOE stock in FDE
    Eotech XPS 2.0 or 3.0
    Ladder rail covers in FDE
     
Thread Status:
Not open for further replies.

Share This Page