Romak 3 scope help.

Discussion in 'Rifle Discussion' started by stitchclimber, Feb 8, 2009.

  1. stitchclimber

    stitchclimber
    St. Louis
    Active Member

    Messages:
    1,010
    Likes Received:
    2
    I have a Romak 3, PSL, Dragonuv, whatever you call it. Anyway, my scope slides on the rail but I don't know how to lock it into place. A little help?
     
  2. Luke B

    Luke B
    portland
    New Member

    Messages:
    37
    Likes Received:
    0
  3. stitchclimber

    stitchclimber
    St. Louis
    Active Member

    Messages:
    1,010
    Likes Received:
    2
    I think mine might be defective. The silver switch does nothing to change the tension on the spring.
     
  4. Luke B

    Luke B
    portland
    New Member

    Messages:
    37
    Likes Received:
    0
    it should be adjustable by you
     
  5. stitchclimber

    stitchclimber
    St. Louis
    Active Member

    Messages:
    1,010
    Likes Received:
    2
    ???

    when I turn the silver switch it does nothing. does the spring need to be set or wound up somehow?
     
  6. Luke B

    Luke B
    portland
    New Member

    Messages:
    37
    Likes Received:
    0
    let me look at one and see tomorrow, you should be able to adjust the spring tension
     
  7. stitchclimber

    stitchclimber
    St. Louis
    Active Member

    Messages:
    1,010
    Likes Received:
    2
    I figured it out. I needed to adjust things with a screwdriver for the silver handle to work. it was all to loose before.
     
  8. Luke B

    Luke B
    portland
    New Member

    Messages:
    37
    Likes Received:
    0
    :) there you go
     
  9. kirkcdl

    kirkcdl
    Roseburg,ORYGUN
    Member

    Messages:
    187
    Likes Received:
    3

Share This Page