Request info on AR build (.300 blackout)

Messages
4
Reactions
2
Howdy Folks !

I am a newbie at an AR build(for a .300blackout). I recently purchased a BCM(Bravo) upper for a .300 blackout. I currrently have an AR 15 lower from Aeroprecision. I am asking from all of you experienced veterans with AR builds, if this combination will work or do I need to buy another lower/upper to get a better fit and function?
Thank you for any advice you can spare, in advance !
Happy and safe 4th !
 
I too like using the same maker for uppers and lowers. But at a minimum make sure the upper is the better quality, because it mates up with a barrel of quality (hopefully). A lower can be switched around or upgraded much more easily in the future.
 
Messages
46
Reactions
114
You may need an AR Wedge like this one if the upper and lower rattles:

It will still shoot just fine without it.
Aero lowers have a tension screw so you don't have to put junk like this in your gun.
 
Messages
11
Reactions
17
I've got a question for you all: My 300 build has a 7.5 barrel. Even after tuning the Superlative gas block so it ejects rounds cleanly in the right direction, it doesn’t want to lock back on an empty mag. I’m shooting Fiocci 220gr subs (what I could get). Supers shoot fine. Using a standard carbine buffer and spring.
 

UPCOMING EVENTS

Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Run the Gun Pistol
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA

LATEST RESOURCE REVIEWS

  • Gooseneck Road
    4.00 star(s)
    8/1/2020
    We went there today, at the righthand fork past the shooter info sign, and at the spot where there's a fallen log across a trail; good backstop...
  • Tigard Pawn 4 More
    5.00 star(s)
    Tigard Pawn for privated transfers: Good to go
    Met someone from the board out in Tigard as he was purchasing three of my Mosins. First stop was at NW Armory but didn't realize they were closed...
  • Buster Beaver Design
    5.00 star(s)
    Great folks!
    Sold a pistol and bought one the same day at Buster Beaver. I got a complete tour of the facility and a briefing on some of their powder coating...
  • Copeland Custom Gunworks
    5.00 star(s)
    Above and Beyond
    I hand delivered an extremely sentimental firearm that needed rebluing. I hoped that he could get it looking half way decent again. Tim went...
  • Buster Beaver Design
    5.00 star(s)
    All around great people A+
    I have had Buster Beaver Cerakote a Sig P229 before and it came out flawlessly. I have also dealt with John a couple of times on firearms...
Top Bottom