WTS OR Reloading outfit

Discussion in 'Reloading Classifieds' started by welderman1949, Dec 12, 2015.

  1. welderman1949

    welderman1949
    Beaverton, Or
    New Member

    Messages:
    16
    Likes Received:
    12
    I have a reloading outfit I want to sell. The press is a C&H 205 that uses shell holder inserts. It has several primer arms with it, as well as shell holders in 30-06 class and 300 WM class. The scale is a Lyman M5 still in the box complete with instructions. There is a Wilson case trimmer with several case holder. There is some rust on the trimmer but not in the case holders. There is a case length gage, powder funnel primer pocket reamer, case neck reamer, a set of C&H dies in 30-06 in an RCBS box, a collet type bullet puller in 308, and 4 loading manuals. There are also around 800 30 cal. bullets, mostly 150gr. There is one box of 165gr HPBT and a box of 100gr. short jacket bullets too. Looking for $250 for the set. Or $300 if I throw in my extra RCBS Uniflow powder measure. Not willing to brake up the set at this time. IMG_2102.JPG IMG_2101.JPG IMG_2111.JPG IMG_2103.JPG IMG_2104.JPG IMG_2108.JPG IMG_2109.JPG IMG_2105.JPG IMG_2106.JPG
     
  2. coyotecaller

    coyotecaller Active Member

    Messages:
    276
    Likes Received:
    191
    Would you be willing to sell all the bullets separately?
     
  3. welderman1949

    welderman1949
    Beaverton, Or
    New Member

    Messages:
    16
    Likes Received:
    12
    At this time I am not willing to sell the bullets separately.
     
  4. coyotecaller

    coyotecaller Active Member

    Messages:
    276
    Likes Received:
    191
    Ok, no problem, thanks anyways
     
  5. Gun Mechanic

    Gun Mechanic
    Portland
    Active Member

    Messages:
    188
    Likes Received:
    78
    I'm interested in the scale if you do end up splitting it up.
     

Share This Page