Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

Reloading kit Deal

Discussion in 'Ammunition & Reloading' started by motoman98, Dec 29, 2009.

  1. motoman98

    motoman98 Gresham, OR Active Member

    Messages:
    676
    Likes Received:
    80
  2. spectra

    spectra The Couve Moderator Staff Member Bronze Supporter

    Messages:
    1,913
    Likes Received:
    720
    Is this the same one Bi-Mart sells for 299?

    Ok looked it up and it is not the master kit that Bi-Mart sells.
     
  3. JohnH

    JohnH Milwaukie Active Member

    Messages:
    583
    Likes Received:
    80
  4. motoman98

    motoman98 Gresham, OR Active Member

    Messages:
    676
    Likes Received:
    80
    Naw, if you're going to save for something: Buy a Dillon RL550
     
  5. Arkitek

    Arkitek Historic Downtown Roseburg Oregon Member

    Messages:
    232
    Likes Received:
    1
    +1 ...on the 550B...it is awesome!
     
  6. JohnH

    JohnH Milwaukie Active Member

    Messages:
    583
    Likes Received:
    80
    No, No, No, really save and get the 650.....and while you are at it get 2.
    If one is good then 2 is even better....meet the twins....

    twins.jpg

    Although I must confess since this picture was taken I had to sell one of these due to the excessive economic stimulus that was flooding into my house...:D
     
  7. HappyRoman

    HappyRoman Sherwood Forest Bronze Supporter Bronze Supporter

    Messages:
    2,166
    Likes Received:
    120
    nice pic JohnH..
    good job moto, thanks for the heads up.
    Keep the powder dry, aim well, shoot often, or at least until the mag is empty
     
  8. wavo

    wavo Portland Member

    Messages:
    244
    Likes Received:
    3
    John you so crazy!

    Did you ever try pulling both handles at the same time? That would've been amazing.
     
  9. Arkitek

    Arkitek Historic Downtown Roseburg Oregon Member

    Messages:
    232
    Likes Received:
    1
    John...You big show off...sure are purdy!:thumbup:...Rex
     
  10. JohnH

    JohnH Milwaukie Active Member

    Messages:
    583
    Likes Received:
    80
    My buddy has the idea if they made a left hand and a right hand (where the handle mounts) you then get roller handles for both and a piece of pipe to tie the two together and LOOK OUT!!

    Need to send that into Dillon...
     
  11. motoman98

    motoman98 Gresham, OR Active Member

    Messages:
    676
    Likes Received:
    80
    Waaay too clean, John, Your hoppers aren't even powder stained!!