- Messages
- 499
- Reactions
- 765
Here are a few items in good shape ready for transplant to a different reloading bench.
The RCBS Trim Pro 2 is in box, all parts with instructions. 1-2 cases trimmed so basically new...
Trimmer works with standard pilots and features a .001" accuracy, coarse and fine trim length adjustments and fine adjustment busing with .001" micrometer marking. One of the other great features of the Trim Pro-2 is that RCBS has eliminated the need for the reloader to purchase different shellplates, the trimmer will hold cases with rim diameters of .250" to .625" and in length from the 5.7x28mm FN to the 338 Lapua Magnum.
RCBS Ram Priming Unit #9165 sits atop your single stage and primes cases with ease.
I liked this method much more than the swing arm primer on Rock Chucker units.
Hornady Lock & Load Conversion bushing (1) & die attachments (10)
Simply insert a Hornady Bushing into your RCBS rock Chucker or other reloading press using a 1-1/4-12 thread, and you're ready to take advantage of Hornady lock-n-load technology. It's the easiest way to get the most out of your competitive reloading press. The lock-n-load conversion. Kit includes 10 die bushings and 1 conversion bushing.
Hornady Titanium Nitride 3 die set for .45 ACP
Titanium Nitride is an extremely hard, smooth coating that's used on high-pressure, high-wear tools. 3-Die set includes a straight wall sizer-decapper die, expander die and bullet seating die with a roll crimp for revolver cartridges and a taper crimp for autoloader cartridges. Shellholder sold separately.
Would like to trade part or all of these items for some items listed below:
CFE-223 | A2230 | H335Powder
.40 S&W 165-180g projectiles
.223 55/60/62g projectiles
Small pistol / Small rifle primers
Can meet in Forest Grove mid-late afternoons as well as weekends.
The RCBS Trim Pro 2 is in box, all parts with instructions. 1-2 cases trimmed so basically new...
Trimmer works with standard pilots and features a .001" accuracy, coarse and fine trim length adjustments and fine adjustment busing with .001" micrometer marking. One of the other great features of the Trim Pro-2 is that RCBS has eliminated the need for the reloader to purchase different shellplates, the trimmer will hold cases with rim diameters of .250" to .625" and in length from the 5.7x28mm FN to the 338 Lapua Magnum.
RCBS Ram Priming Unit #9165 sits atop your single stage and primes cases with ease.
I liked this method much more than the swing arm primer on Rock Chucker units.
Hornady Lock & Load Conversion bushing (1) & die attachments (10)
Simply insert a Hornady Bushing into your RCBS rock Chucker or other reloading press using a 1-1/4-12 thread, and you're ready to take advantage of Hornady lock-n-load technology. It's the easiest way to get the most out of your competitive reloading press. The lock-n-load conversion. Kit includes 10 die bushings and 1 conversion bushing.
Hornady Titanium Nitride 3 die set for .45 ACP
Titanium Nitride is an extremely hard, smooth coating that's used on high-pressure, high-wear tools. 3-Die set includes a straight wall sizer-decapper die, expander die and bullet seating die with a roll crimp for revolver cartridges and a taper crimp for autoloader cartridges. Shellholder sold separately.
Would like to trade part or all of these items for some items listed below:
CFE-223 | A2230 | H335Powder
.40 S&W 165-180g projectiles
.223 55/60/62g projectiles
Small pistol / Small rifle primers
Can meet in Forest Grove mid-late afternoons as well as weekends.
