Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

Question about 922r compliancy

Discussion in 'Legal & Political Archive' started by Blane67, Apr 4, 2011.

  1. Blane67

    Blane67 columbia gorge Active Member

    Messages:
    165
    Likes Received:
    37
    would a numbers matching norinco sks be compliant imported by csi ont ca. thanks
     
  2. Generator

    Generator Bend Member

    Messages:
    213
    Likes Received:
    5
    Yes.
    922r is only an issue if you want to put on a new stock or a detachable mag. Then you have to play the 10 or less game.
    Unaltered SKSs are fine.
    "csi ont ca" who is this importer?
     
  3. Blane67

    Blane67 columbia gorge Active Member

    Messages:
    165
    Likes Received:
    37
    Not sure, buying an SKS, seller says import stamp on gun is CSI Ontario, Calif.
     
  4. Chee-to

    Chee-to Oregon Well-Known Member

    Messages:
    2,289
    Likes Received:
    1,707
    CSI Ontario, Calif. imported many Norinco products before the ban............
     
  5. DiscoFam

    DiscoFam Springfield Member

    Messages:
    72
    Likes Received:
    5
    So if you bought an sks that was number matching and afterwards purchased a 30 round mag you would have to do even more alterations to get it 'legal'?
     
  6. Generator

    Generator Bend Member

    Messages:
    213
    Likes Received:
    5
    Yes. If it is altered - removing the mag and putting on a non-original one - it needs to have 10 or less original parts. There are lists of what counts for what # of parts. A 30rd mag is 2 parts I believe.
     
  7. One-Eyed Ross

    One-Eyed Ross Winlock, WA Well-Known Member

    Messages:
    1,367
    Likes Received:
    752
    wouldn't a mag be three? Body, follower and floor plate? Or am I missing the boat somewhere?
     
  8. Generator

    Generator Bend Member

    Messages:
    213
    Likes Received:
    5
    It is 3 parts when it is detachable. It is 2 parts when it is original - the floorplate is part of the body. Either way, there are still more than 10 other imported parts,
    here is a list from the ATF on what they consider parts on a Chinese SKS.

    1. Receiver
    2. Barrel
    3. Bolt
    4. Bolt carrier
    5. Gas piston
    6. Trigger housing
    7. Trigger
    8. Hammer
    9. Sear
    10. Disconnector (see below)
    11. Stock
    12. Handguard
    13. Magazine body
    14. Follower

    And here is where I did my SKS research, there is more info on their from the ATF.
    922(r) Parts Count Info from ATF - 14 Parts!