Project Appleseed

Project Appleseed
Posted by Pahonix
Douglas Ridge Rifle Club
Saturday, February 27, 2021 - 08:30 AM
Until: Saturday, February 27, 2021 - 05:00 PM
(Adjusted for timezone: America/Los_Angeles)
Categories

Event Dates
All times have been adjusted for the timezone: America/Los_Angeles

This event has expired and has no upcoming dates

Pahonix

Messages
266
Reactions
529
Eagle Creek, OR - Douglas Ridge Rifle Club
February 27, 2021 - February 28, 2021
This is a standard Appleseed event.
Both Centerfire and 22 Rimfire rifles are allowed at this event.
Register Now
Address: 27787 HWY 224, Eagle Creek, OR 97022
Website: www.douglasridge.org

Please Read: How to Prepare for an Event
Safety Notice:
Firearms must be cased and left in vehicle until after the Safety Briefing. Do Not bring your firearms out until instructed to bring them to the firing line. No loaded firearms on the range unless on the firing line and load command has been given. Eye and ear protection required. No illegal firearms are allowed. Some ranges are .22 rimfire only. At ranges that allow centerfire no rifle cartridges over 8mm cal or handgun cartridges over .45 cal are allowed.
EFFECTIVE IMMEDIATELY THE USE OF SMITH AND WESSON M&P 15/22’S AT AN APPLESEED ARE HEREBY TEMPORARILY PROHIBITED DUE TO RECENT SAFETY ISSUES.
Range Fee:
$10 per weekend for adults.
Camping Available:
No camping on site, campsites available nearby:
Milo K McIver State Park (5.5) open from March 15 to October 31
Barton Park (1.5) open from April 1 to September 30

Hotels:
Within 15 miles to many major chain hotels including
Best Western Sandy Inn 503-668-7100 (8.3 mi)
Howard Johnson Inn (Gresham) 503-666-9545 (11.3)

Directions:
From I-205 exit Hwy 224, then east on Hwy 224 approx 11.2 miles www.douglasridge.org/directions.html

GPS: 45.372833,-122.376847
State Laws to be aware of:
State gun laws at the NRA: nraila.org/gun-laws/state-gun-laws/.aspx
State gun laws at GLBS: gunlawsbystate.com/#!/states/-gun-laws
It is the responsibility of attendees to know and comply with all State and Federal Firearms Laws.
Misc:

No steel core ammo is allowed.
Centerfire rifles welcome.

For more information contact:
Name:
OR State Coordinator Email Address: OR@appleseedinfo.org
Name: Ben Edman Phone: 503-319-9359
Instructors Resources: PDF
 

Ironbar

Messages
2,420
Reactions
2,737
Oh snap! We finally get one going and I can't go! I'll be on a plane to Vegas the very next day and I need time to pack!
 

reblwing

Messages
293
Reactions
185
400 to 500 rounds. If you were to do the allotted 11 rounds per string, 5 strings per stage plus a mulligan, si max of 66 rounds per stage. With 8 stages that makes 528 rounds.
 

bzltyr

Messages
623
Reactions
342
Just a question? I received the gauge to check the gapping from Smith & Wesson and the 15/22 checked out, and gauge was flush. Is that still a no for the shoot?
 
OP
Pahonix

Pahonix

Messages
266
Reactions
529
I don't think they would have an issue with it. You could confirm but it's more fun just to join in.

This past weekend was my first. Had a great time and learned a lot. I was shooting bolt action and want to try it again with a semi auto.
 

UPCOMING EVENTS

Albany Rifle & Pistol Club (ARPC) Gun Show 2021 show is cancelled
Linn County Expo Center
3700 Knox Butte Rd E, Albany, OR 97322, USA
22 Rimfire Challenge
Redmond Rod and Gun Club
Redmond, OR 97756, USA
Rimfire Challenge May 8th @ DRRC
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA

LATEST RESOURCE REVIEWS

  • HighLine Firearms
    5.00 star(s)
    One of the best!
    I have bought from online and in person. Great store, he had things I did not know were needed. I try and recommend Highline Firearms to people I...
  • Copeland Custom Gunworks
    5.00 star(s)
    The only gunsmith I'll use
    Tim has done a few projects for me and the result is always the same. Amazing. End of story. From complete refinish to custom machining, Tim is...
  • Copeland Custom Gunworks
    5.00 star(s)
    great work refinishing my 27 year old 1991 a1 compact colt .45
    Tim did a great job making my gun look brand new again and replacing the old parts inside. Super Happy!!
  • Lucky Sporting Goods
    5.00 star(s)
    Just a transfer but a great one. A+
    Came here today to meet another forum member to buy a Glock. Was the best transfer I've had the pleasure of doing. Even though I was just there...
  • Copeland Custom Gunworks
    5.00 star(s)
    Great work threading Tikka barrel
    I dropped off my Tikka to have Tim thread the stainless barrel. GREAT work. Excellent communications. Highly recommend Tim. Very good value for...
Top Bottom