Processed 40 S&W Brass

Discussion in 'Ammunition Classifieds' started by JohnH, Sep 26, 2009.

Thread Status:
Not open for further replies.
  1. JohnH

    JohnH
    Milwaukie
    Active Member

    Messages:
    591
    Likes Received:
    85
    This brass has been tumbled for 24 hours and then I spray with RCBS Case Lube and run through a Redding G-Rx Push Thru Base Sizing Die. This makes all the cases uniform and straight. I then retumble the brass for another 24 hours to get the lube off and it gets the brass nice and shiny. Brass has also been sorted by headstamp and counted by putting into trays. I also have the boxes to go with the trays if you want to have something to put your loaded ammo in after you’re done.

    I can ship USPS Flat Rate boxes for $11 for medium and $14 for large box.
    Payment with USPS Money Order preferred, cash works also….

    Thanks, John


    th_redding.jpg
    th_All40.jpg
    th_Win.jpg
    th_fed1.jpg
    th_MISC1.jpg
    th_RP2.jpg
    th_SPEER.jpg
    th_Box1.jpg
    th_Box2.jpg
     
    Last edited: Oct 4, 2009
  2. HappyRoman

    HappyRoman
    Sherwood Forest
    Bronze Supporter Bronze Supporter

    Messages:
    2,198
    Likes Received:
    149
    Very Pretty, alot of hard work, good Luck
     
  3. crabman21

    crabman21
    Wilsonville,Ore
    Member

    Messages:
    191
    Likes Received:
    9
    I will take 1/k winchester brass if we can meet somewhere and I will pay cash. Thanks. Mike:thumbup:
     
  4. JohnH

    JohnH
    Milwaukie
    Active Member

    Messages:
    591
    Likes Received:
    85
    Mike, yes I can meet you.
    Cantact info sent via PM.
    Thanks, John
     
  5. crabman21

    crabman21
    Wilsonville,Ore
    Member

    Messages:
    191
    Likes Received:
    9
    John. pmed you.:thumbup:
     
  6. Gunner3456

    Gunner3456
    Salem
    Well-Known Member

    Messages:
    5,113
    Likes Received:
    845
    I just got some of John's brass in the mail. I've never seen such a wonderful job of polishing brass. :thumbup:
     
  7. crabman21

    crabman21
    Wilsonville,Ore
    Member

    Messages:
    191
    Likes Received:
    9
    PMed you.:)
     
  8. crabman21

    crabman21
    Wilsonville,Ore
    Member

    Messages:
    191
    Likes Received:
    9
    very nice brass and a good guy to deal with. Thanks again John.:thumbup:
     
  9. nitetime

    nitetime
    Springtucky Oregon
    Bronze Supporter Bronze Supporter

    Messages:
    63
    Likes Received:
    2
    Now THAT is processed brass!! What a great job and a real neat and gracious guy to deal with.. Thank You John.. I already have a box loaded to try out my load.. Thanks again..
     
Thread Status:
Not open for further replies.

Share This Page