I have a new never used Pro-Tech Bravo Half shell (OD Green) tactical helmet I would like to trade for a medium military issue ACH helmet. The helmet listed below has velcro, but no other accessories included. If interested please call or txt Jim @ 503-828-2717. Thanks for looking. The Bravo Helmet is the latest model in Pro-Tec’s Military polymer line. A full design refinement of the original Alpha shell, the Bravo Helmet includes some new features and upgrades. These polymer helmets are purpose-built for Military and Law Enforcement operations where ballistic properties are not required. They are lightweight and provide a stable mounting platform for night vision goggles. The Bravo Helmet is also rated for head protection in hazardous environments such as Open-Cockpit Vehicle Operation, HALO/HAHO, Watercraft, Diving, Rappelling, Climbing, Hard-Hat Zones, Nuclear Facility, HAZMAT etc. It features an EVA foam interior pad system that provides hours of comfortable wear. The pads are closed-cell, so they will not absorb water during maritime operations and can be completely decontaminated after exposure to blood and oil. The Bravo Helmet comes pre-drilled for attaching both single and triple hole NVG shrouds. Dynamic Air Porting keeps the operator’s head cool while allowing water to easily drain. Combined with the submersible foam pads, this feature makes the Bravo Helmet ideal for diving/ submarine lockout operations. Out of the box, the Bravo Helmet comes complete with a single side rail on the left side for attaching lights or illuminators. But, the other side of the shell is pre-drilled for attaching another rail (sold separately). This allows for integration with the MBU-12/P and NATO Oxygen Mask. A new bungee goggle retention strap system replaces the older rubber strap found on the legacy Alpha model. These bungee straps also allow for attaching MOLLE fasteners. The Half Shell variant is specifically shaped to accommodate electronic hearing protection and radio headsets including DC, Lightspeed, Bose, Sordin, and Peltor.The Bravo Helmet comes with adhesive-backed pile tape on the right, top, and rear of the helmet for attaching patches and IFF devices. Lastly, a four-point chinstrap assembly, complete with nape pad and chin cup, provide stability for NVG’s. The chinstrap is attached via black zinc Phillips bolts which will not rust or pop like rivets. The Pro-Tec Bravo Helmet is a fully-featured affordable helmet platform for night vision goggles, extreme sports, and Military/ Law Enforcement operations.