Post your ARs (Expected to be Pic heavy)

[hungfarlow82]

All 14.5"s

 

[Mark_Dorman]

All 14.5"s

View attachment 1376530 View attachment 1376531

I really dig the black and grey look. I think I'm gonna do that on one mine. Nice setups.

 

[Esam85]

Parts keep rolling in to enhance this bad little pellet slinger

 

[dinky450]

Parts keep rolling in to enhance this bad little pellet slinger

View attachment 1383266

Nice! ive been working with a builders kit from them. Finally got most of the part together should be assembling soon.

 

[dinky450]

I said I wasn't going to build another but here we are.

 

[Seraphim38]

Building 5 ARs today...

 

[AshWilliams]

Building 5 ARs today...

You, sir, are the recipient of the NWF Patriot of the Month award.

 

[Member 34319]

I said I wasn't going to build another but here we are.

View attachment 1385990 View attachment 1385991 View attachment 1385992

Looks light, except that stock. I'd love to do a lightweight build with a carbon barrel.

 

[CamoDeafie]

This is gonna trigger some....

12" 6.5 Grendel SBR

12" Six-Five Outfitters Monster Grendel barrel

A2 308 flash hider

Pinned FSB

C7 A1 upper

Poverty pony lower, A2 type with A2 grip

M4 fat handguards and M4 waffle stock




With the M4 furniture



Minus the M4 stock; and with skinny 6-hole CAR-15 single heat shield handguards; waiting on PSA's Retro CAR-15 stock

 

[dinky450]

Looks light, except that stock. I'd love to do a lightweight build with a carbon barrel.

I didn't try to build a light weight build. I have the same barrel on a ar-10 and it has been good and accurate. Radian builders kit is middle weight I think. I need to put it on the scale and see complete weight before optics. I have the ubr stock on another build and love it. The weight balances the rifle out pretty well.

 

[Seraphim38]

2 stamper... 10.3 BA Hanson 5.56/Geissele HG/Velocity 3lb. trigger/V7 mag release/SIG romeo 5/Hogue grip/Streamlight HLX/SBPDW, soon to be a VLTOR IMOD/AIM ambi safey/Armaspec H3 SRS/Magpul dust cover/Armaspec takedown pins/AIM Surplus BCG/Strike Industries fde charging handle/Aero Precision lower parts kit

 

[Tomahawk67]

Centurion c4 reciever set, rhf4 rail and 14.5 centurion recce barrel with ocm5 can.
NF nxs 2.5-10

 

[RyanG90]

6.5cm build

View attachment 1390512

 

[CamoDeafie]

For now. May swap upper for a 16" Midlength. .223 Wylde 1:9 M4 upper. Poverty pony lower, swapped M4 stock assembly for Doublestar Corp Ace Skeleton stock. No-name carry handle, pretty accurate. Skinny CAR 7-hole handguards, because I dislike the fat M4 handguards.

 

[powermad]

Swapped out the Wilson Combat HG for an IWI 15.5" Arca rail.
Swapped out the A5 stock for an A2 along with a Breek Arms OD green charging handle.
Another tri-pod is next.

 

[Mark_Dorman]

Just finish my first upper "build". Original gun was a Stag15 Tactical with 16" 5.56 Barrel. This is kind of my test build to see how I like the 14.5 length and how it does a the range. I'd like to put together a "do-it-all" upper but didn't want to go too heavy on new parts until I nail down more of the details so stuck to a low budget for now.

Lower: Stag15 Tactical (Factory)

• Trigger: Hiperfire RBT - Single Stage
• Stock: Magpul MOE SL Carbine Stock
• Grip: Magpul MOE

New upper list:

• Barrel: Ballistic Advantage .223 Wylde 14.5in Premium Fluted
• Gas Tube: Ballistic Advantage Melonite
• Gas Block: Superlative Arms Adjustable
• Muzzle Device: VG6 Delta 556 (pin & welded)
• Handguard: STNGR VLCN M-Lok 12.5"
• Upper Receiver: Aero Precision M4E1 Threaded with Aero Forward Assist and Dust Cover
• BCG: Aero Precision Nitride
• Charging Handle: Aero Precision Breach
• Foregrip: Magpul AFG-2 (gonna try out a BCM Gunfighter next)
• Scope/LPVO: Vortex Strike Eagle 1-6x24 AR-BDC3
• LPVO Mount: Aero Precision Ultralight 30mm SPR
• Rail Covers: M-LOK Type 2

 

[Mono1]

Just finish my first upper "build". Original gun was a Stag15 Tactical with 16" 5.56 Barrel. This is kind of my test build to see how I like the 14.5 length and how it does a the range. I'd like to put together a "do-it-all" upper but didn't want to go too heavy on new parts until I nail down more of the details so stuck to a low budget for now.

Lower: Stag15 Tactical (Factory)

• Trigger: Hiperfire RBT - Single Stage
• Stock: Magpul MOE SL Carbine Stock
• Grip: Magpul MOE

New upper list:

• Barrel: Ballistic Advantage .223 Wylde 14.5in Premium Fluted
• Gas Tube: Ballistic Advantage Melonite
• Gas Block: Superlative Arms Adjustable
• Muzzle Device: VG6 Delta 556 (pin & welded)
• Handguard: STNGR VLCN M-Lok 12.5"
• Upper Receiver: Aero Precision M4E1 Threaded with Aero Forward Assist and Dust Cover
• BCG: Aero Precision Nitride
• Charging Handle: Aero Precision Breach
• Foregrip: Magpul AFG-2 (gonna try out a BCM Gunfighter next)
• Scope/LPVO: Vortex Strike Eagle 1-6x24 AR-BDC3
• LPVO Mount: Aero Precision Ultralight 30mm SPR
• Rail Covers: M-LOK Type 2

View attachment 1397281 View attachment 1397286 View attachment 1397287

Congrats Bro!

Uppers are harder than lowers!

 

[Mjb9164]

13.7 build. My go to rifle.
SOLGW M89 rail, barrel, bcg
Geissele SD-E trigger
Rainier arms upper/lower receiver
B5 grip
BCM stock
Surefire scout
Scalarworks mro mount
Nox flash hider

 

[bionic knees]

80% kit I picked up last summer, runs like a champ

 

[Mono1]

13.7 build. My go to rifle.
SOLGW M89 rail, barrel, bcg
Geissele SD-E trigger
Rainier arms upper/lower receiver
B5 grip
BCM stock
Surefire scout
Scalarworks mro mount
Nox flash hider

View attachment 1400454 View attachment 1400466

Geissele Baby!!