Post your ARs (Expected to be Pic heavy)

[ORYGUNHolsterCompany]

New 308 build

Upper/lower: Falcor defense full ambi 308
Barrel: 18" shilen match
Trigger: Geissele SSA-E
Bcg: Azimuth technologies
Rail: SMOS mlok 13.5"
Gas block: Schilin
Gas tube: cmmg
Safety: Axts talon ambi
Charge: Falcor defense ambi
Buffer tube: PWS ebt mod2
Buffer: falcor defense carbine
Buffer spring: falcor defense carbine
Grip/stock: Magpul... Sigh...
Optics: Trijicon accupoint 5-20x50 / Leupold delta point pro
Mounts: American defense/ leupold
Bipod: Atlas bt10 v8

 

[xXC_WillsXx]

Ruger AR556 With GUNTEC Free Float MLok rail, Magpul VG, Magpul CTR Stock, Lancer mags. Next is a Vortex SPARC 2 and lots of range time

 

[Andyh23]

Here's my first build:

• Aero Precision assembled upper
• Aero Precision stripped lower
• Ballistic Advantage 17.7" Hanson mid-length performance series barrel
• Odin Works 223 nitride BCG
• Seekins Precision NOXs M-LOK 15" Rail

• Midwest Industries 3-CHAMBER AR Muzzle Brake

• Magpul MOE® Carbine Stock - FDE

• Strike Industries ARCH - AR-15 Charging Handle - Extended Latch

• JBO Lower Receiver Parts Kit WITHOUT Trigger

• JBO Stainless Steel Gas Tube - Mid Length

• Hiperfire Hipertouch EDT Enhanced Duty Trigger

• ERGO 2 Suregrip - FDE

• Spikes Tactical 6pos Milspec Carbine Stock Hardware Kit with T2 Buffer

• 30rd Hexmag - FDE

• Diamondhead Polymer Sights

 

[Hun Shooter]

Recent AR owner here S&W M&P 15 Sport 2 lightly tacticoolized

 

[token3495]

 

[3MTA3]

View attachment 307162

I'm suffering from scope envy...

 

[token3495]

I'm suffering from scope envy...

yeah the SWFA is decent

 

[CamoDeafie]

Finally finished the build. Don't think I will be doing a 2pt sling on this. Maybe 1 pt. Sarco Inc AR Flat top kit with 16" .223 Wylde US made M4 profile barrel and birdcage flash hider, M4 stock, on Andersen MFG lower. Rear sight is a no-name A2 style unit. Most if not all the parts look brand new/barely used.

 

[ORYGUNHolsterCompany]

300 blackout pistol build for discreet carry in public. The brake is getting ditched for a thread protector on order, the elfman trigger was sitting around and wont work with 45 degree safeties safely so used a bad 90 degree for now. Going with a geisselle ssa-e.

Armalite spr mod1 carbine monolithic upper
Aero gen2 lower
Fail zero bcg
Shilin custom 7.8" 300 blk barrel/block
Elfman ar-15 trigger (for now)
AAC 51t brake (for now)
Law Tac folder
Kak pistol tube
Bcm carbine buffer and spring
Kak shockwave arm brace
Bad ambi safety (for now)
Axts raptor charge
Lwrc HK style front sight
Carry handle rear sight
Surefire X300 ultra wml
Surefire 60 rnd mag
B5 grip
Magpul afg
Magpul trigger guard

Added a couple large pull tabs to the zippers on the briefcase for easier use. Basically done now.

Thanks to Mike at Tornado Technologies in Hillsboro for doing a great job on the barrel shortening!!

 

[ORYGUNHolsterCompany]

View attachment 306888 Here's my first build:

• Aero Precision assembled upper
• Aero Precision stripped lower
• Ballistic Advantage 17.7" Hanson mid-length performance series barrel
• Odin Works 223 nitride BCG
• Seekins Precision NOXs M-LOK 15" Rail

• Midwest Industries 3-CHAMBER AR Muzzle Brake

• Magpul MOE® Carbine Stock - FDE

• Strike Industries ARCH - AR-15 Charging Handle - Extended Latch

• JBO Lower Receiver Parts Kit WITHOUT Trigger

• JBO Stainless Steel Gas Tube - Mid Length

• Hiperfire Hipertouch EDT Enhanced Duty Trigger

• ERGO 2 Suregrip - FDE

• Spikes Tactical 6pos Milspec Carbine Stock Hardware Kit with T2 Buffer

• 30rd Hexmag - FDE

• Diamondhead Polymer Sights

Very nice first build man!!

 

[Andyh23]

Very nice first build man!!

Thanks!

 

[Quartermaster]

Tada!

 

[ORYGUNHolsterCompany]

Tada!

View attachment 308470

Dig the a2 upper!!

 

[Gene Rojas]

My Spike's tactical ST-15 build is finally done- I went with an assembled upper receiver group with a mid length gas block and MOE foregrip, a Spike's lower receiver, their lower parts kit, and a Magpul ACS-L stock. Aimsurplus single point sling and ambi end plate coming. Rear sight is a Troy folding unit. I've owned a Colt AR-15 before, but this is my first build- after getting it checked out I'm really looking forward to firing it.

Geno

 

[JeremyK]

Finally finished the build. Don't think I will be doing a 2pt sling on this. Maybe 1 pt. Sarco Inc AR Flat top kit with 16" .223 Wylde US made M4 profile barrel and birdcage flash hider, M4 stock, on Andersen MFG lower. Rear sight is a no-name A2 style unit. Most if not all the parts look brand new/barely used.

View attachment 308371 View attachment 308372

+1 for those Sarco AR kits. I've got a build with one of those too, and it works great! Not the prettiest thing in the world, but it goes bang when it should, and is accurate.

 

[Jerderv]

My lightweight AR. 4lbs 15.3oz.

 

[JeremyK]

My lightweight AR. 4lbs 15.3oz.
View attachment 310464
View attachment 310465

Jerderv, I'm jealous! How'd you get it so light?

 

[Jerderv]

Jerderv, I'm jealous! How'd you get it so light?

Thanks man!! Just picked out lightweight parts when buying. Modified a few things to remove weight. etc.

Heres the parts list with weights. I could have gone lighter on a few things, like the lower receiver. But my goal was just to get under 5lbs.

Upper:

Aero Precision no FA upper receiver 06.1oz
Faxon 16" 4150 Pencil barrel 19.6oz
ALG 13" V2 handguard 11.7oz
2A LW Regulated BCG 08.0oz
DSA Titanium A2 Flash Hider 01.2oz
Anderson Mil spec CH w/ v7 latch 01.0oz
Spikes Melonite gas tube 00.8oz
2A Titanium gas block 00.8oz
V7 Aluminum Port door/port door rod 00.4oz

UPPER TOTAL: 49.6oz 3lbs 1.6oz

Lower:

PSA Lower 8.9oz
PSA EPT Trigger, mil spec spring, discon/pin 1.2oz
PSA EPT Hammer, modified, alg purple, pin 1.0oz
Magpul poly Trigger guard 0.2oz
V7 Al Take down and pivot pins 0.2oz
V7 Safety 3 gun hybrid 57* 0.3oz
V7 Bolt catch S7 tool steel 0.3oz
V7 Mag catch Aluminum 0.2oz
V7 End plate Aluminum 0.2oz
V7 Castle nut Aluminum 0.3oz
Modified mil spec Buffer tube 3.8oz
Modified Magpul MOE Stock 5.3oz
Modified Magpul K grip with V7 TI screw 2.1oz
V7 Titanium grip screw 0.1oz
Gutted buffer 1.0oz
Tubb's SS .308 spring trimmed 2.0oz
Buffer retainer 0.1oz


LOWER TOTAL: 27.3oz 1lb 11.3oz

Magpul MBUS G2 02.5oz

SIGHTS TOTAL: 02.5oz



RIFLE TOTAL:______79.3oz______4lbs 15.3oz______4.95lbs______

 

[SA Shooter]

Did a little tweak to my Ruger SR556 Takedown recently. The Vortex Viper PST 1-4x24 was removed in favor of a Vortex Crossfire II 3-9x50. I needed a bit more magnification for the SR and I'll re-purpose the PST for another build.

Before:





After:





I'll give it a test fire and sight it in tomorrow.

 

[JeremyK]

Thanks man!! Just picked out lightweight parts when buying. Modified a few things to remove weight. etc.

Heres the parts list with weights. I could have gone lighter on a few things, like the lower receiver. But my goal was just to get under 5lbs.

Upper:

Aero Precision no FA upper receiver 06.1oz
Faxon 16" 4150 Pencil barrel 19.6oz
ALG 13" V2 handguard 11.7oz
2A LW Regulated BCG 08.0oz
DSA Titanium A2 Flash Hider 01.2oz
Anderson Mil spec CH w/ v7 latch 01.0oz
Spikes Melonite gas tube 00.8oz
2A Titanium gas block 00.8oz
V7 Aluminum Port door/port door rod 00.4oz

UPPER TOTAL: 49.6oz 3lbs 1.6oz

Lower:

PSA Lower 8.9oz
PSA EPT Trigger, mil spec spring, discon/pin 1.2oz
PSA EPT Hammer, modified, alg purple, pin 1.0oz
Magpul poly Trigger guard 0.2oz
V7 Al Take down and pivot pins 0.2oz
V7 Safety 3 gun hybrid 57* 0.3oz
V7 Bolt catch S7 tool steel 0.3oz
V7 Mag catch Aluminum 0.2oz
V7 End plate Aluminum 0.2oz
V7 Castle nut Aluminum 0.3oz
Modified mil spec Buffer tube 3.8oz
Modified Magpul MOE Stock 5.3oz
Modified Magpul K grip with V7 TI screw 2.1oz
V7 Titanium grip screw 0.1oz
Gutted buffer 1.0oz
Tubb's SS .308 spring trimmed 2.0oz
Buffer retainer 0.1oz


LOWER TOTAL: 27.3oz 1lb 11.3oz

Magpul MBUS G2 02.5oz

SIGHTS TOTAL: 02.5oz



RIFLE TOTAL:______79.3oz______4lbs 15.3oz______4.95lbs______

View attachment 310485

I'm impressed! You were pretty scientific about it!