I am looking to sell my POF 308 16" barrel rifle. I have shot approx. 400 rounds through the rifle. The deal will include the orginal accy. that came with the rifle. Viking Tactics sling, MI QD sling mount, DD rear reciever QD mount, Magpul ladder rails on the top. A total of 6 20rd PMAGS as seen in the picture. Price is $2000.00 for a FTF sale only. I am not looking for any trades at this time. The reason I am selling is because I have to many 308 rifles and some need to go. If you our intersted or have any questions please email me.
[email protected]
Description:
Patriot Ordnance Factory 16″ 308 Rifle.
Specifications:
Barrel:
16″ Heavy contour, Fluted to reduce weight and Heat
4150 Mil-B-1159F Vanadium Alloy (machinegun rated)
70 Rockwell case hardened heat treated 5R polygonal barrels are 2X harder then Mil-Spec & Hammer Forged barrels
Corrosion resistant and 10 times thicker and hardness than mil-spec chromed lining
5R Polygonal Rifled barrels from Rock Creek Barrels, Inc. < Muzzle>
Chamber: 7.62×51 mm NATO (.308 Cal.)
Method of Operation:
Gas Piston operated, rotating bolt (short stroke system)
2-position gas plug for Normal (N) or Suppressed (S) operating modes
C.R.O.S.+ (Corrosion Resistant Operating System): NP3 Coating Chrome plated: Barrel, Gas Block/Tube (billet machined), Gas Plug (billet machined), Gas Piston (billet machined), Bolt Carrier Assembly (Integral Keyed Billet Machined), Teflon Nickel plated A3 Flattop Upper Receiver and Charging Handle.
Bolt & Carrier:
Teflon Nickel Plated 8620 Integral Keyed Steel Bolt Carrier (billet machined), heat treated / plated per Mil Spec.
Chrome plated Bolt, heat treated, to Mil-spec
Upper Receiver:
A3 Flattop, Billet machined 7075-T6 aircraft aluminum alloy
A3 Flattop: NP3 Teflon Plated
Charging handle: Black Teflon Coated
Lower Receiver:
P-308, Billet Machined 7075-T6 aircraft aluminum alloy w/Oversized Trigger Guard
NP3 Teflon Coating
Competition 4 lb. Trigger Group
ERGO Tactical Pistol Grip
KNS Anti-rotational pins
VLTOR Buttstock with Milspec Tube
Handguards:
Ergo ladder rail covers
Sling mount
POF-USA M.R.R. Modular Railed Receiver, Free Floating Monolithic top rail, tactical rail system
Heat Sink Barrel Nut
POF-USA Specifications:
All raw materials are manufactured from U.S. Steel Mills. All heat treats, plating/coatings, are completed by U.S.A. owned and operated manufacturers. All accessory and component parts on our weapons systems are from U.S.A. owned and operated manufacturers. All of our weapon systems are 100% pure American made.
[email protected]
Description:
Patriot Ordnance Factory 16″ 308 Rifle.
Specifications:
Barrel:
16″ Heavy contour, Fluted to reduce weight and Heat
4150 Mil-B-1159F Vanadium Alloy (machinegun rated)
70 Rockwell case hardened heat treated 5R polygonal barrels are 2X harder then Mil-Spec & Hammer Forged barrels
Corrosion resistant and 10 times thicker and hardness than mil-spec chromed lining
5R Polygonal Rifled barrels from Rock Creek Barrels, Inc. < Muzzle>
Chamber: 7.62×51 mm NATO (.308 Cal.)
Method of Operation:
Gas Piston operated, rotating bolt (short stroke system)
2-position gas plug for Normal (N) or Suppressed (S) operating modes
C.R.O.S.+ (Corrosion Resistant Operating System): NP3 Coating Chrome plated: Barrel, Gas Block/Tube (billet machined), Gas Plug (billet machined), Gas Piston (billet machined), Bolt Carrier Assembly (Integral Keyed Billet Machined), Teflon Nickel plated A3 Flattop Upper Receiver and Charging Handle.
Bolt & Carrier:
Teflon Nickel Plated 8620 Integral Keyed Steel Bolt Carrier (billet machined), heat treated / plated per Mil Spec.
Chrome plated Bolt, heat treated, to Mil-spec
Upper Receiver:
A3 Flattop, Billet machined 7075-T6 aircraft aluminum alloy
A3 Flattop: NP3 Teflon Plated
Charging handle: Black Teflon Coated
Lower Receiver:
P-308, Billet Machined 7075-T6 aircraft aluminum alloy w/Oversized Trigger Guard
NP3 Teflon Coating
Competition 4 lb. Trigger Group
ERGO Tactical Pistol Grip
KNS Anti-rotational pins
VLTOR Buttstock with Milspec Tube
Handguards:
Ergo ladder rail covers
Sling mount
POF-USA M.R.R. Modular Railed Receiver, Free Floating Monolithic top rail, tactical rail system
Heat Sink Barrel Nut
POF-USA Specifications:
All raw materials are manufactured from U.S. Steel Mills. All heat treats, plating/coatings, are completed by U.S.A. owned and operated manufacturers. All accessory and component parts on our weapons systems are from U.S.A. owned and operated manufacturers. All of our weapon systems are 100% pure American made.
thanks shooter 61 great deal
