Platinum Lifetime
- Messages
- 642
- Reactions
- 423
I've got a full suite of very slightly used SilencerCo ASR accessories. I've switched over to KeyMo with my home-made Form 1 can so that I can run it under a couple of handguards, so I've got these ASR parts available for someone that could use them.
I'll put them up here for a week on NWFA before I cross-post on eBay.
TWO - ASR 3-port brake 7.62 5/8x24 thread (AC591) - SOLD
One was on my 300BLK, the other on my RPR. Both were Rocksett in place, and show signs of use, but nothing major. Neither has seen more than 100 rounds through it, and both have seen a mix of suppressed and non-suppressed for those rounds. Each comes with a new set of alignment shims (one is opened, but never used).
ONE - ASR 3-port brake 5.56 1/2x28 thread (AC142) - SOLD
This was on my 18" SPR, and was also Rocksett in place and shows signs of use. It has seen around 100 rounds through it - a mix of suppressed and non-suppressed for those rounds. It comes with a used but complete shim set.
ONE - ASR Saker Mount/Adapter (AC622) - $100
This will convert a Saker or Chimera 300 over to use the ASR mounts. It has seen maybe 200 rounds through it while I was using it to mount my Form1 can on the various rifles that had the above mounts on them. There's some carbon on the inside, but that's what the inside of a silencer mount looks like...
ONE - ASR Blast Shield (AC1548) - $110
This one has the ASR mount integral to the body, and keeps you from rattling the teeth of the guys on either side of you at the range. Used this for about 20 rounds on my 308 - there's a little color in there from muzzle gasses, but not much.
Prices are FTF in Vancouver or Portland. I'll ship at cost if you want to do PP Gift/Family. PM me if you are interested - I go by the PM date for sake of fairness.
Trade considerations/wishlist (cash added as appropriate):
I'll put them up here for a week on NWFA before I cross-post on eBay.
TWO - ASR 3-port brake 7.62 5/8x24 thread (AC591) - SOLD
One was on my 300BLK, the other on my RPR. Both were Rocksett in place, and show signs of use, but nothing major. Neither has seen more than 100 rounds through it, and both have seen a mix of suppressed and non-suppressed for those rounds. Each comes with a new set of alignment shims (one is opened, but never used).
ONE - ASR 3-port brake 5.56 1/2x28 thread (AC142) - SOLD
This was on my 18" SPR, and was also Rocksett in place and shows signs of use. It has seen around 100 rounds through it - a mix of suppressed and non-suppressed for those rounds. It comes with a used but complete shim set.
ONE - ASR Saker Mount/Adapter (AC622) - $100
This will convert a Saker or Chimera 300 over to use the ASR mounts. It has seen maybe 200 rounds through it while I was using it to mount my Form1 can on the various rifles that had the above mounts on them. There's some carbon on the inside, but that's what the inside of a silencer mount looks like...
ONE - ASR Blast Shield (AC1548) - $110
This one has the ASR mount integral to the body, and keeps you from rattling the teeth of the guys on either side of you at the range. Used this for about 20 rounds on my 308 - there's a little color in there from muzzle gasses, but not much.
Prices are FTF in Vancouver or Portland. I'll ship at cost if you want to do PP Gift/Family. PM me if you are interested - I go by the PM date for sake of fairness.
Trade considerations/wishlist (cash added as appropriate):
- Dead Air Pyro muzzle brake with blast shield
- Anarchy Outdoors APRG grip
- Low profile clamp-on 0.75" adjustable gas block - Superlative Arms or Odin Works
Last Edited: