- Messages
- 33
- Reactions
- 22
Hey everyone. Super new to the reloading scene here and just finished my first small batch that was more of a trial run to get to under stand the dillon 550 i got. Any ways. I loaded up some 9mm im concern is my recipe. Kinda worries i may have seated to deep? I have a bunch of berrys hollow base flat tip thick plate. I am unable to find any load data on these bullets. So i ended up trying to piece together something from what other people did.. not the brightest but wanted to play with the machine and dont mind pulling the bullets and starting over. Will be shooting from a glock 17 and ruger e9. They pass the plunk test in each gun. However my other 124gr ft store bought bullets are an overall length of 1.100. Does the recipe below pose a serious pressure concern?
berrys 124gr hbfp tp
5.2grain unique
Cci small pistol primer
Over all length was 1.065
berrys 124gr hbfp tp
5.2grain unique
Cci small pistol primer
Over all length was 1.065