new S&W 1911sc e-series bobtail commander...prob

Discussion in 'Handgun Discussion' started by dusty, Feb 8, 2013.

  1. dusty

    dusty
    Mountlake Terrace
    Active Member

    Messages:
    209
    Likes Received:
    62
    Very accurate. Had one problem. After 80 rnds, the trigger quit . Got it home, and discovered that the trig adj screw had worked its way in.. Backed it off til the trigger dropped the hammer and applied blue loktite....
    Works great now... Very happy with the piece...
     
  2. Keane

    Keane
    Hillsboro, OR
    Active Member

    Messages:
    734
    Likes Received:
    53
    Thanks for the heads up! I have one of these, so I'll have to make sure the loctite is applied.
     
  3. MountainBear

    MountainBear
    Sweet Home, OR
    Well-Known Member

    Messages:
    3,767
    Likes Received:
    2,792
    That's a common issue on all triggers that use an adjustable overtravel screw. Always check and adjust these screws before you take a new gun out to shoot...
     
  4. dusty

    dusty
    Mountlake Terrace
    Active Member

    Messages:
    209
    Likes Received:
    62
    :thumbup:
     
  5. gunjunky

    gunjunky
    Arlington, WA
    Active Member

    Messages:
    511
    Likes Received:
    106
    When you get ready to sell it let me know:) Congrats on a nice pistol.
     
  6. dusty

    dusty
    Mountlake Terrace
    Active Member

    Messages:
    209
    Likes Received:
    62
    All is good. At the range, it ran perfect..200 rounds at 25yds ,all in a 14 inch circle
     

Share This Page