Multi-cal use .308 rated suppressor suggestions, please!

Discussion in 'NFA Weapon Discussion' started by Stomper, Nov 7, 2015.

  1. Stomper

    Stomper
    SCREW YOU SALEM!!
    SCREW YOU SALEM! Gold Supporter

    Messages:
    15,783
    Likes Received:
    31,451
    Hey you suppressor geeks!

    I'm gearing up towards getting a suppressor that is .308 rated, yet can be quickly used on different platforms/calibers with whatever "quick-change" adapters are required. What sorts of animals fit this criteria? All suggestions are appreciated!



    The platforms this would be potentially used on are:

    AR15's in 5.56mm and 6.8SPC
    (Future) AR10 in .308
    Galil in .308
    AK's in 7.62x39 (typical LH threads)
    Ruger American Rifle in .308 (threads TBD later)
    10/22 (LOL)
     
  2. etrain16

    etrain16
    Oregon
    Bronze Supporter Bronze Supporter 2017 Volunteer

    Messages:
    11,524
    Likes Received:
    32,677
    I don't know much about suppressors, but I'll be watching this thread. I'll be surprised if there is such a critter that can meet all your requirements.
     
    MasterChief1 and Caveman Jim like this.
  3. erudne

    erudne
    The Pie Matrix
    PPL Say Sleeping W/Your Rifle Is A bad Thing?

    Messages:
    6,278
    Likes Received:
    6,959
    Last edited: Nov 7, 2015
  4. jbett98

    jbett98
    NW Oregon
    Bronze Supporter Bronze Supporter

    Messages:
    7,760
    Likes Received:
    11,841
  5. mrblond

    mrblond
    Salem OR
    Well-Known Member

    Messages:
    2,180
    Likes Received:
    2,579
  6. aflineman

    aflineman
    Both South of Eugene and East of Portland.
    Active Member

    Messages:
    576
    Likes Received:
    185
    SilencerCo Omega
     
    SunTzu, jblake00 and Rockys like this.
  7. Twodogs

    Twodogs
    portland Or
    Well-Known Member

    Messages:
    700
    Likes Received:
    254
    I just put money down on a Dead air sandman-s for use on 6.8,300 bo ,.308 win.
    Should see it in feb.
     
  8. 308

    308
    ΜOΛΩΝ ΛΑΒΕ
    ΜOΛΩΝ ΛΑΒΕ Silver Supporter

    Messages:
    4,554
    Likes Received:
    11,919
    You're going to have a hard time getting an adapter to fit the AK threads. Most mgfs steer well clear because they believe the threads and bore are not concentric, and given the sloppy fit against the FSB, you'll probably end up with baffle strikes.
     
    MasterChief1 likes this.
  9. Stomper

    Stomper
    SCREW YOU SALEM!!
    SCREW YOU SALEM! Gold Supporter

    Messages:
    15,783
    Likes Received:
    31,451

    I.... WILL NOT.... be denied. o_O



    I'll just have an adaptor custom fabbed.:D
     
  10. 308

    308
    ΜOΛΩΝ ΛΑΒΕ
    ΜOΛΩΝ ΛΑΒΕ Silver Supporter

    Messages:
    4,554
    Likes Received:
    11,919
    Suppressed 10/22s are great :)

    IMG_20151107_151627589 (444x800).jpg
     
    filsonhand and Stomper like this.
  11. beezer66

    beezer66
    Salem, OR
    Active Member

    Messages:
    141
    Likes Received:
    53
    I have a Hair Trigger Bufffalo, a .30 cal suppressor, rated to .300 WIN MAG, it uses YHM quick detach muzzle brakes. YHM makes several QD mounts with different thread sizes, AK included. I run mine on 5.56, .300 AAC BLK, and .308 WIN. The big down side is weight, it's heavy.
     
    MasterChief1 likes this.
  12. Rockys

    Rockys
    Clark county
    Member

    Messages:
    58
    Likes Received:
    17
    +1 on the Silencerco Omega. Great can, qd mounts, I use mine on 308, 300blk, & 5.56.

    I would get a dedicated rimfire can though, that is some dirty stuff and you need to clean them.
     
    MasterChief1 likes this.
  13. billgrigsby24

    billgrigsby24
    Beaverton, Or
    Bronze Supporter Bronze Supporter

    Messages:
    497
    Likes Received:
    226
    I really like my SilencerCo Specwar 7.62. Its a bit heavy but sound reduction is awesome. If I had to choose a different one, I'd go with the Omega. 10oz is a big difference on the end of the barrel!
     
  14. Martini_Up

    Martini_Up
    NW USA
    Well-Known Member

    Messages:
    1,738
    Likes Received:
    2,060
    AAC makes a LH 51t mount. No strikes while mounted on my FAL (also LH threads) It's not hard to mount these and confirm they're not going to result in a baffle strike. If in fear, have professionally done.
     
  15. PDXSparky

    PDXSparky
    Keizer / Hillsboro
    Well-Known Member

    Messages:
    2,503
    Likes Received:
    1,125
    As would I. Despite what a few manufacturers claim, .22 LR cans do get filled up with lead and need to be disassembled to be cleaned.
     
  16. JedB

    JedB
    PDX
    Well-Known Member

    Messages:
    490
    Likes Received:
    279
    I have an AAC 7.62 SD (more basic) with the 51Tooth quick detach flash hider.
    It's economical compared some of the others. I've used it on my bolt .308.

    Need to get to Tornado and have them install another flash hider on my FAL.

    I have the flash hider on all my ARs, and my 300blk SBR.

    I'm very happy with AAC.
    I would recommend Hilary at Curt's Discount Shooter Supply in Milwaukie. She knows the ins/outs and will be very helpful.

    I also went the trust route, so my SBR was done on a form-1.
     
    jbett98 likes this.
  17. tarster

    tarster
    Albany
    Bronze Supporter Bronze Supporter

    Messages:
    410
    Likes Received:
    338
    I did a bunch of research and looking around and your going to end up with either a Silencerco Omega (I just got mine) or a Gemtech "One" personally for price and everything I would go with the Omega as i did a few months back, the other thing is I have heard that Silencerco is coming out with a Hybrid that is supposed to cover everything from 22 to 45/70, if that's the case... one can to rule them all.. but until then.. I would get a dedicated .22 can and then a 30 cal can of your liking, There is a lot of AAC 51t adapters out there, but they have been proven to not be nearly as reliable as first sold..the Omega uses a similar design with a better grip mechanism. The omega is also the lightest, quietest and cheapest of the can out there.. without going into the 1500 to 2400$ range for the can alone..

    I would also highly suggest looking through http://www.silencershop.com/ and also http://www.capitolarmory.com/ as both will have sales and deals for you. I went through the silencershop to get my trust and can, and it was very easy.. hardest part was waiting.

    IMG_8756.JPG
     
    MasterChief1 and billgrigsby24 like this.
  18. Iceman04503

    Iceman04503
    Portland, or
    Well-Known Member

    Messages:
    473
    Likes Received:
    343
    I just ordered my omega for my 30 cal and tactical solution axiom for my .22 from the silencershop. Now gotta wait.
     
  19. jblake00

    jblake00
    North Oregon Coast
    Active Member

    Messages:
    197
    Likes Received:
    223
    I put my money towards an Omega. Absolutly love it! Granted it's my first suppressor...

    20150724_221516.jpg

    20151101_134523.jpg
     
    MasterChief1 and Stomper like this.
  20. Twodogs

    Twodogs
    portland Or
    Well-Known Member

    Messages:
    700
    Likes Received:
    254
    Thought hard about the omega or the sayker but then the Dead air sandman came on sale for $760.00 I couldn't pass it up .
    I would love to do a side by side with one of you guy with an omega when mine comes in.
     
    MasterChief1 and SunTzu like this.

Share This Page