- Messages
- 645
- Reactions
- 428
Moving to a new thread for consolidation.
Cleaning up a little... I don't plan on using these, so I'm hoping someone else might. Not necessarily listed in any order...
Aero Precision M4E1 Enhanced upper receiver - $100 GONE
Cleaning up a little... I don't plan on using these, so I'm hoping someone else might. Not necessarily listed in any order...
Aero Precision M4E1 Enhanced upper receiver - $100 GONE
- Assembled with dust cover and forward assist
- Made for use with BAR diameter handguards made by many brands (including Aero)
- Includes barrel nut wrench
- Includes new generic plain-jane charging handle (not pictured)
- Used - less then 100 rounds fired with this upper
- Works with the BAR barrel nut or with the M4E1 Enhanced Upper
- Includes short rail section at 12-o-clock at front
- Mounting screws included
- Suppressor diameter if used with very short barrels
- Stops just behind the muzzle device on the above 300 BLK barrel
- Used - less than 100 rounds fired with this handguard
- Threaded M13.5x1LH with hex flats
- Came with my MPX Tacops, but that now has a real can on it...
- Fits on a 4.5" barrel (K models) and will extend out past the end of the 8" handguard
- Has seen about 100 rounds through it
- Standard angle (25?)
- Came on my Gen1 Precision Rifle, fits any AR
- Used maybe 20 rounds... If that matters
- Used on a 300 BLK build for <100 rounds
- Not sure the vintage or the maker - I'm guessing late 70's or early 80's, but I'm not an expert by any stretch
- I bought it used but never put my rifle into it (went a different route)
- Has a few minor dings and dents that you would expect for a wood stock that has actually been used, but really very minor. PM me for some more detailed pics
- It will fit a magnum sporter profile barrel
- You will need a longer front screw for this compared to the stock one that comes with today's tupperware stocks - you can get them from Brownells for a few bucks and they are easy to trim and fit.
Last Edited:
