- Messages
- 378
- Reactions
- 622
Ill start by saying that S&W was very quick to get me squared away with a shipping label to get it back for repair.
Less than 100 rounds through the new 15-22 and had a bunch of FTEs and stovepipes along with ejections ranging between flopping out of the port to 6". Finally, the extractor relieved itself from duty without approval.
It is getting sent back tomorrow, along with the parts that are no longer in place.
Anyone upgrade/modify their extractor and/or ejector which has proven to be reliable?
Side note. Shooting steel at 200+ on the side of a hill with a 22 is more fun than getting it zeroed at 100 on paper.
Less than 100 rounds through the new 15-22 and had a bunch of FTEs and stovepipes along with ejections ranging between flopping out of the port to 6". Finally, the extractor relieved itself from duty without approval.
It is getting sent back tomorrow, along with the parts that are no longer in place.
Anyone upgrade/modify their extractor and/or ejector which has proven to be reliable?
Side note. Shooting steel at 200+ on the side of a hill with a 22 is more fun than getting it zeroed at 100 on paper.