Build Thread Lets see your modded Remington 700s

[BLUE COLLAR IRONS]

Lets have fun with this. I want to see pics of everyones modded Remington 700's.
It can be as little as just a trigger mod or muzzle break all the way up to full chassis and barrel swaps.
Post pics with a full list of modifications.
What you use the rifle for, what handloads you are using (if applicable) and what kind of accuracy you are getting.
Ill start it off...

Read More

 

[BLUE COLLAR IRONS]

Remington 700 LR in 300 win. (the only original parts are the bolt and action)
Used for ELR shooting, 2800 yards and out. (Steel plate)

Mods:
MDT ESS aluminum chassis w/ 18" hand guard
Bartlein stainless 1:9 straight taper heavy varmint barrel
4AW muzzle break
ERGO flat top grip
Badger Ordinance 45MOA steel rail w/ recoil lug
Schmidt and Bender PM2 5-25x56
Ivey Shooting 50mil elevating scope base/rings (I'm getting my full 26 mils from the scope for a total of 76+ mils of available elevation correction).
Nightforce angle cosign indicator
Accuracy 1st ceramic bubble level
Timney .8lb (point 8) trigger
Fluted bolt
Atlas 5H bipod w/ American defense QD mount
AADMOUNT scope caps (The absolute best btw)
AADMOUNT magnification lever
Magpul 5rd magazine

Load:
230g Berger Hybrid target
75g of H1000
Federal Gold Match large rifle primers GM210M (non magnum
Norma cases
.4 to .5 MOA all day.
The gun shoots way better than I do. In a led sled this rifle will punch through the same hole over and over at 100 yards.





upload photos to internet

upload photos to internet

upload photos to internet

 

[BLUE COLLAR IRONS]

no one huh?

 

[Kruel J]

I strongly considered the 700 for a long distance platform but instead decided to go with the RPR. That is one sweet looking tack driver there!

 

[token3495]

Remington 700 AAC-SD
Fluted bolt
Badger Ordnance bolt knob
PTG Speedlock firing pin assembly
Nightforce 20MOA base
AAC muzzle brake
Accuracy International AXMC Chassis
Atlas bipod
Calvin Elite trigger
Spuhr Scope mount
Vortex Razor Gen 2 4.5-27x scope
AAD Mounts scope covers

 

[NightMan]

Here's my Remington 700 in .308
AICS
Accurized bolt
Match chambered & hand lapped 26"stainless match barrel (1x10 twist)
Vortex Tri-Port muzzle brake
Match single stage trigger 2.75#
Parker-Hale bipod,
Accushot monopod
Nightforce NXS 5.5x22x56mm
.382 group at 100 yards

 

[rcnpthfndr]

Built by Kampfeld Custom
300wm

 

[Aero Denezol]

Very nice. You guys that have the muzzle brakes, did you install those yourself or have a gunsmith do it? How much does it run $$$ (ballpark)?

Currently working on a modest R700 build/project. Thanks,

 

[NightMan]

I had my gunsmith install it while he was working on the receiver & barrel. The cost was $225 for the brake and the labor was included with my original quote for the work.

 

[token3495]

Installed myself. Straightforward install

 

[BLUE COLLAR IRONS]

View attachment 395130

Built by Kampfeld Custom
300wm

Nice USO scope ; )

 

[BLUE COLLAR IRONS]

Very nice. You guys that have the muzzle brakes, did you install those yourself or have a gunsmith do it? How much does it run $$$ (ballpark)?

Currently working on a modest R700 build/project. Thanks,

There is a guy named Loren Peters in Vancouver that does barrel work for a VERY good price. He charges under $100 I think to thread the muzzle.

 

[BLUE COLLAR IRONS]

View attachment 395108
View attachment 395109

Remington 700 AAC-SD
Fluted bolt
Badger Ordnance bolt knob
PTG Speedlock firing pin assembly
Nightforce 20MOA base
AAC muzzle brake
Accuracy International AXMC Chassis
Atlas bipod
Calvin Elite trigger
Spuhr Scope mount
Vortex Razor Gen 2 4.5-27x scope
AAD Mounts scope covers

I dig those AI chassis,.. How do you like it??

 

[token3495]

I dig those AI chassis,.. How do you like it??

I really like it. very comfortable.

 

[RingingEars]

I recently sold this. Started life as .243 sps. Bought the stock and had it glassed by a local smith. SWFA on top.

 

[clearconscience]

I have a Rem700 but it's a VTR and I don't want to muck up your thread of beauties.

I have been wanting to doing a longer range rifle (sticking with .308) and was going back and forth over a Remington and a Savage.
Went with that later.

 

[BLUE COLLAR IRONS]

View attachment 395515
I recently sold this. Started life as .243 sps. Bought the stock and had it glassed by a local smith. SWFA on top.

rad stock,,

 

[P7M13]

I built a 7mm Long Range Magnum based on Gunwerks 7mm LRM.
Rem 700 LA taken off a 300 RUM
MDT 21 chassis
McGowen 1:8 26" Remage barrel
Muzzle brake by Nathan Wright
Luth AR buttstock, DPMS hand grip
Leupold MK IV LR/T 6.5-20x50 (not shown)
9# as shown. 11# with glass and magazine.

180 gr SMK's at 2975 FPS (7x.3gr Retumbo)
Recoil less than my 308 (no brake).
1MOA in my hands, 1/4 MOA in my daughter's hands, same load.

I have ~250 Bob Cauteurico, 193gr projectiles. Was going to try those soon.

 

[nehalemguy]

This is my 700 Ti clone...

 

[rcnpthfndr]

View attachment 395515
I recently sold this. Started life as .243 sps. Bought the stock and had it glassed by a local smith. SWFA on top.

whos stock is that? I really like the ergonomics of it.