- Messages
- 117
- Reactions
- 257
Versapod Sling Swivel Adapter, like new. I know it looks a little worn but aside from dust this is how it looked straight out of the package, I never used it. Attaches to a sling swivel, provides a place to brace the web of the hand against a barricade, has a QD socket in the head of the knurled nut at the bottom and allows attachment of a Versapod. $20 shipped
Pierce grip extension for S&W M&P Shield 9mm $10 shipped
Beretta PX4 safety/decocker lever. This is taken off a new pistol, it's the standard extended F-type style. Can be converted to G-type by knocking the ball detent out with a punch. It's not brand new like a spare one would be, because it was installed and tested at the factory, but it's "new" as in "not used." $25 +shipping
Please note: Just like brand new packaged replacements, you will need to re-use the decocker spring, decocker roll pin and firing pin extension! Don't lose yours because this doesn't come with those parts!
SOLD Mountain Tactical/Tikka Performance Gen 2 scope base for Tikka T3, 20 MOA cant with integral recoil lug, includes screws. This one is receiver length, not extended. It's a really nice aluminum scope base, had it on a 7mm Rem mag with no signs of distress, see pictures. Appears to have Loctite residue on the bottom surface. SOLD
SOLD One pair Leupold PRW scope rings, 1" diameter, "Low" height, steel rings and a steel recoil lug insert. I can take specific measurements if you like however because they clamp to the sides, the rail-top-to-tube-bottom measurement will vary slightly from rail to rail. Used on the same 7mm Rem mag with no signs of distress, see pictures. SOLD
New unopened Impact Weapon Components steel keymod bipod adapter stud, fits into a keymod slot for use with Harris-type bipods or sling swivels. Nice, cheap, slick way to install a bipod on a free float rail. SOLD $10 +shipping SOLD
Pierce grip extension for S&W M&P Shield 9mm $10 shipped
Beretta PX4 safety/decocker lever. This is taken off a new pistol, it's the standard extended F-type style. Can be converted to G-type by knocking the ball detent out with a punch. It's not brand new like a spare one would be, because it was installed and tested at the factory, but it's "new" as in "not used." $25 +shipping
Please note: Just like brand new packaged replacements, you will need to re-use the decocker spring, decocker roll pin and firing pin extension! Don't lose yours because this doesn't come with those parts!
SOLD Mountain Tactical/Tikka Performance Gen 2 scope base for Tikka T3, 20 MOA cant with integral recoil lug, includes screws. This one is receiver length, not extended. It's a really nice aluminum scope base, had it on a 7mm Rem mag with no signs of distress, see pictures. Appears to have Loctite residue on the bottom surface. SOLD
SOLD One pair Leupold PRW scope rings, 1" diameter, "Low" height, steel rings and a steel recoil lug insert. I can take specific measurements if you like however because they clamp to the sides, the rail-top-to-tube-bottom measurement will vary slightly from rail to rail. Used on the same 7mm Rem mag with no signs of distress, see pictures. SOLD
New unopened Impact Weapon Components steel keymod bipod adapter stud, fits into a keymod slot for use with Harris-type bipods or sling swivels. Nice, cheap, slick way to install a bipod on a free float rail. SOLD $10 +shipping SOLD
Last Edited: