Help with a Leupold scope

Discussion in 'Scopes & Optics' started by Stack, Mar 27, 2015.

  1. Stack

    Stack
    Oregon
    New Member

    Messages:
    5
    Likes Received:
    0
    Question answered.

    I appreciate the replies.
     
    Last edited: Apr 6, 2015
  2. solv3nt

    solv3nt
    Portland
    Well-Known Member

    Messages:
    1,913
    Likes Received:
    1,301
    If it already has a rail, 1" picatiny rings.
     
  3. Reno911

    Reno911
    Hillsboro
    Well-Known Member 2015 Volunteer 2016 Volunteer 2017 Volunteer

    Messages:
    1,819
    Likes Received:
    2,043
    A set of medium 1" rings or a one piece cantilever 1" mount like that of Burris PEPR.
     
  4. Papercidal

    Papercidal
    Vancouver ,Wa
    Active Member

    Messages:
    213
    Likes Received:
    155
  5. JDAVIS

    JDAVIS
    washington co.
    Member

    Messages:
    81
    Likes Received:
    27
    run what was recommended at the link above. or make sure that the rings put the centerline of the scope tube at 1.4-1.5" above the rail. thats the height needed for the flat top ar, unless it has a raised rail on it.
     
  6. DieselScout

    DieselScout
    S Clackamas County
    Well-Known Member

    Messages:
    2,373
    Likes Received:
    1,771
    What's the point of this? Why not leave the question up, so if others have the same question they can get it answered with a search instead of posting and waiting?
     
  7. solv3nt

    solv3nt
    Portland
    Well-Known Member

    Messages:
    1,913
    Likes Received:
    1,301
    "What difference does it make!?!?!?!?!"

    Sorry, I couldn't help myself ;)
     

Share This Page