Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

H&K MP5 Sub-Machine Gun Test Quiz Questions

Discussion in 'NFA Weapon Discussion' started by bill74, Jun 7, 2012.

  1. bill74

    bill74 Lewisville TX New Member

    Messages:
    6
    Likes Received:
    0
    H&K MP5 Sub-Machine Gun Test Quiz Questions

    I am semi-retired and I am taking a self-passed and self-taught Armorers course and now I am on the H&K MP5 Sub-Machine Guns. I hope to become a part-time light Gunsmith in the future.

    There are over 60 quiz questions covering this firearm and I have answered most of them but during my study and research I am having some problems related to some of the following quiz questions. Either I am not sure of the correct answer or I have conflicting answers.

    Can you help me determine the correct answers for these few 6 quiz questions? Please correct my wrong answers!

    Thanks for your help.

    Note #7. What catches the hammer to hold it rearward when the action cycles in semi auto mode?
    a) The trigger bar
    b) The trigger nose (front upper portion of the trigger)
    c) A shelf that is machined into the inner right side of the receiver
    d) The sear

    Note #8. The safety selector blocks the tail of the trigger when in the safe position. True or False.
    a) True
    b) False

    Note #9. How many notches does the hammer in the full auto trigger pack have in it?
    a) One notch
    b) Two notches
    c) Three notches

    Note #10. When the selector is in full auto mode, it allows the tail of the trigger to move ...
    a) Lower so that the hammer can't engage and be caught by the trigger tail.
    b) Higher, which in turn raises the trigger bar high enough to catch the hammer when the trigger is released.
    c) Higher, thus moving the sear low enough so that it does not catch the hammer.
    d) Rearward, thus preventing it from engaging the hammer notch.

    Note #11. The MP5 is hammer fired, so when the gun is in full auto mode and the trigger is pulled rearward, the sear is not engaging the notch in the hammer. What holds the hammer rearward (preventing hammer follow down)?
    a) Nothing holds the hammer rearward and it must follow down in full auto mode. After the first shot, the gun fires from an open bolt. The hammer is what holds the firing pin forward, allowing enough positive protrusion to fire the gun.
    b) The catch
    c) The trigger tail
    d) The trigger bar

    Note #12. In a "Burst Pack", what prevents the counting wheel from rotating counterclockwise (back to its start point) during a three round burst?
    a) The stop latch
    b) The shifter rod
    c) Eccentric bushing
    d) Trigger nose
     
  2. Gopherboy128

    Gopherboy128 West-Side New Member

    Messages:
    10
    Likes Received:
    2
  3. Benihaus

    Benihaus Portland American

    Messages:
    349
    Likes Received:
    111