- Messages
- 67
- Reactions
- 16
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
All of a sudden the spring hangs up and doesn't pop up to engage the slide lock. Removed spring, looks OK. This happened after firing 100 ends and was removing slide to do cleaning. Took slide off and the slide lock fell out.
[emoji35]
This is better Sorry;You are confusing the slide stop and the slide lock. The slide lock is what you depress on both sides of the frame to remove the slide. It is held in place with a flat spring that is inserted into the receiver and pushes up on the slide lock.
The lever was installed correctly. The 36 only has 500 rnds through it and has been problem free until this incident. I would replace the spring but the part is only available to certified armorers.