gas mask, armor plates, body armor - Tigard/Beaverton

[fd15k]

Two Ceradyne ESAPI Medium plates, manufactured 04-07. These are rated APM2 (Armor piercing .30-06) when used in conjunction with
soft vest. This is NIJ level IV equivalent. $280

Composite armor plate certified NIJ Level IIIA (stops most pistol rounds). Plate is flat 9x12x0.5 inches. Excellent for carrying in laptop bag or backpack. I have a smaller plate from the same manufacturer rated to the same level. Shot it with 7.62x25, 9mm, .40, .45 and 10mm. 10mm caused most amount of damage, but no penetration.

$100

Eagle Plate carrier with built-in soft (IIIA) armor. Excellent condition. Size large.

$320

MCU 2A/P gas mask excellent condition, Large. This is the newer US military gas mask that comes with the microphone
adapter. Will include commercial mask pouch, 1 sealed latest generation filter and 2 sealed previous generation
filters (not shown in the pic).

$80

View attachment 132746View attachment 132747

View attachment 132748
View attachment 132749

View attachment 132750

Read More

 

[fd15k]

bumpo

 

[fd15k]

bump it up

 

[fd15k]

bumpity

 

[fd15k]

bump it up!

 

[fd15k]

bump it

 

[fd15k]

bmp

 

[fd15k]

still available

 

[fd15k]

bump

 

[fd15k]

bump

 

[fd15k]

bump

 

[fd15k]

bump

 

[fd15k]

bumps

 

[fd15k]

bmp

 

[fd15k]

bump

 

[NWRider]

Interested in any trades for the mask / carrier? Let me know thanks - have camping / hiking gear, xps laptop and some other stuff.

 

[fd15k]

bump

 

[erudne]

So you shot the composite plate several times, is that what your saying?

 

[fd15k]

So you shot the composite plate several times, is that what your saying?

I have tested a smaller plate made to the same specs by the same manufacturer. Here are the pics :

View attachment 125216
View attachment 125217View attachment 125218

 

[CounterOfBeans]

I have tested a smaller plate made to the same specs by the same manufacturer. Here are the pics :

View attachment 124617
View attachment 124618View attachment 124619

Not trying to be "that guy", but if the promise for stopping steel core 30.06 is the claim being used to get people to hand over their money, the bump count on this post is suggesting that a pistol ammo test isn't going to be an attention getter. With the trauma that it's gone through already, would it be fair to test it with an actual 30.06 AP round?