Fixed

Discussion in 'General Firearm Discussion' started by Miller3, Nov 26, 2012.

  1. Miller3

    Miller3
    Salem. OR
    New Member

    Messages:
    10
    Likes Received:
    0
    Fixed
     
  2. Phasade

    Phasade
    Seattle, WA
    New Member

    Messages:
    16
    Likes Received:
    2
    I haven't see it as an issue in my own XDm 40 nor have I seen it metioned as a "common issue" on the XDtalk.com forums.
     
  3. hman40cal

    hman40cal
    Dallas OR
    Member

    Messages:
    52
    Likes Received:
    13
    I don't know about the xdm but I have a xd 40cal and never had a problem with it what your describing I would say it's the ammo
     
  4. Uberdillo

    Uberdillo
    Oregon
    Active Member

    Messages:
    371
    Likes Received:
    152
    Sounds like light strikes across ammo brands. Simple first step is check/clean the firing pin channel and firing pin right?
     
  5. omenwolf

    omenwolf
    Oregon
    Active Member

    Messages:
    310
    Likes Received:
    81
    I had the same problem with a glock 26 I had awhile back. It was the firing pin in the slide had too much oil in there. Sprayed out with degreaser and compressed air, then lightly lubed and never had the problem again.
     
  6. jb11

    jb11
    salem
    Active Member

    Messages:
    503
    Likes Received:
    111
    If you need to take the striker out I have a set of punches I bought from springer precision to keep on hand just in case.I am also in salem just let me know if you need them.
     
  7. ATCclears

    ATCclears
    Seattle area, WA
    Well-Known Member

    Messages:
    2,876
    Likes Received:
    3,777
    I have multiple XDm pistols and have never experienced that problem.

    Peter
     
  8. funfflyer26

    funfflyer26
    Oregon City
    New Member

    Messages:
    7
    Likes Received:
    3
    It's not common to my XDm, I have ~2000 rounds through mine so far with zero issues.
     
  9. Tony617

    Tony617
    Washington State
    Bronze Supporter Bronze Supporter

    Messages:
    359
    Likes Received:
    452
    Please delete.
     
  10. Miller3

    Miller3
    Salem. OR
    New Member

    Messages:
    10
    Likes Received:
    0
    That makes a lot of sense, I'm going to try that tomorrow. Thanks for your help.
     

Share This Page