- Messages
- 25
- Reactions
- 1
I've been making a few of these for various pistols inclucing S&W M&P Shield and Bodyguard, Glock 26, SIG 226 MK25 and P220 Combat, and Ruger Mark III. I'd be happy to help someone make their own or make one for them. We cam make a holster out of 0.060 kydex or thicker. The 0.060 is the same as Crossbreed's holsters and gives enough that the gun "snaps" into the holster. Leather can be different than what is pictured as well as mounting hardware. I make my own Kydex J Hooks from 0.093 Kydex as it is stiffer. Call or email if interested. I make all of mine using the actual gun. Heat the kydex and then put it on the gun to fit. Gun gets warm, but not hot. We'll need to meet and make it on the spot. Nice thing is it is as you like it. Takes me about 1 1/2 hours to make one if it is from the drawing board.
You'll see one of the holsters that is similar to Crossbreed's OWB holster, but I add Kydex backing to make it stiff and tight to the body side. I like it better than the raven all kydex style (tight, comfortable, well contoured, and partial leather feel).
Holsters are roughly $35 depending on style
Thanks,
ELi
541-530-3450
Located Outside of Roseburg, Oregon
You'll see one of the holsters that is similar to Crossbreed's OWB holster, but I add Kydex backing to make it stiff and tight to the body side. I like it better than the raven all kydex style (tight, comfortable, well contoured, and partial leather feel).
Holsters are roughly $35 depending on style
Thanks,
ELi
541-530-3450
Located Outside of Roseburg, Oregon