- Messages
- 377
- Reactions
- 131
Daniel Defense MK18 complete upper with DD OmegaX 9.0 rail system and complete Spikes Tactical pistol lower receiver. Magpul MBUS Gen 2 front and rear sights and Sig brace. ---SOLD to Heckler---
Daniel Defense upper:
The Daniel Defense MK18 Complete AR-15 Pistol Upper Assembly is a faithful recreation of the US Navy's Mk18 Mod 1 platform, and features a Premium 10.3" Cold Hammer Forged Barrel made from Mil-Spec 4150 Chrome-Moly Vanadium Steel that is Chrome Lined for durability and corrosion resistance. M4 feed ramps are incorporated into the barrel extension and upper to enhance reliable feeding, while a true 5.56x45 NATO chamber ensures that both commercial and higher pressure surplus mil-spec ammunition may be safely used. The bolt and carrier both pass a thorough Magnetic Particle Inspection (MPI) test for guaranteed structural integrity, and the gas key is properly staked to its mil-spec bolt carrier. All steel parts feature a heavy Mil-Spec Phosphate finish for superior corrosion resistance and durability, while aluminum parts are Type III Hard Coat Anodized.
This upper comes equipped with a 9.0 OmegaX Mk18 Quad-Rail Handguard that covers a pinned, low profile gas block at the carbine gas port position and Free Floats the barrel for increased accuracy potential. The OmegaX povides ample room for adding tactical accessories, while also creating a full length, uninterrupted top rail surface with the A4 Flat-Top receiver that can accommodate a shooter's chosen optic and/or iron sight arrangement. Complete with charging handle assembly and Daniel Defense Flash Hider, the MK18 upper is ready to drop onto any pistol or registered SBR small pin lower receiver.
Technical Information:
Spikes Tactical pistol lower:
Features
This is a complete firearm and is fully functioning and ready to shoot. It's been sighted in at 50 meters and has had exactly 3 mags through it (90 rounds).
- Asking $1250 with possible partial/full trade for other firearms
Daniel Defense upper:
The Daniel Defense MK18 Complete AR-15 Pistol Upper Assembly is a faithful recreation of the US Navy's Mk18 Mod 1 platform, and features a Premium 10.3" Cold Hammer Forged Barrel made from Mil-Spec 4150 Chrome-Moly Vanadium Steel that is Chrome Lined for durability and corrosion resistance. M4 feed ramps are incorporated into the barrel extension and upper to enhance reliable feeding, while a true 5.56x45 NATO chamber ensures that both commercial and higher pressure surplus mil-spec ammunition may be safely used. The bolt and carrier both pass a thorough Magnetic Particle Inspection (MPI) test for guaranteed structural integrity, and the gas key is properly staked to its mil-spec bolt carrier. All steel parts feature a heavy Mil-Spec Phosphate finish for superior corrosion resistance and durability, while aluminum parts are Type III Hard Coat Anodized.
This upper comes equipped with a 9.0 OmegaX Mk18 Quad-Rail Handguard that covers a pinned, low profile gas block at the carbine gas port position and Free Floats the barrel for increased accuracy potential. The OmegaX povides ample room for adding tactical accessories, while also creating a full length, uninterrupted top rail surface with the A4 Flat-Top receiver that can accommodate a shooter's chosen optic and/or iron sight arrangement. Complete with charging handle assembly and Daniel Defense Flash Hider, the MK18 upper is ready to drop onto any pistol or registered SBR small pin lower receiver.
Technical Information:
- Upper Receiver: A4 Flat-Top
- Barrel Length: 10.3"
- Barrel Contour: Government
- Barrel Material: 4150 Chrome Moly Vanadium, Cold Hammer Forged
- Muzzle Thread Pattern: 1/2"-28
- Chrome Lined: Yes
- Barrel Finish: Mil-Spec Heavy Phosphate
- Twist Rate: 1 in 7"
- Chamber: 5.56x45mm NATO
- M4 Feed Ramps: Yes
- Muzzle Device: Daniel Defense Flash Hider
- Gas System Length: Carbine
- Gas Block Diameter: 0.750"
- Handguard: DD OmegaX 9.0
- Sights: None
- Bolt Carrier Assembly Included: Yes
- Bolt Carrier Type: Mil-Spec
- Extras: Pinned Low Profile Gas Block
- Weight: 3 lbs, 8.0 oz
Spikes Tactical pistol lower:
Features
- ST Spider Logo
- Bullet Pictogram Selector Markings
- Low Shelf, RDIAS Compatible
- ST Standard LPK
- Pistol Buffer Tube, Castle Nut, Staked Latch Plate
- 17-7 Stainless Buffer Spring
- ST-T2 Buffer
- Standard Pistol Grip
This is a complete firearm and is fully functioning and ready to shoot. It's been sighted in at 50 meters and has had exactly 3 mags through it (90 rounds).
- Asking $1250 with possible partial/full trade for other firearms
Last Edited:
