- Messages
- 479
- Reactions
- 606
- Ad Type
- For Sale
- Price
- $800
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- State
- Washington
I had this barreled action spun up last sept or so. Used it for Mule deer in October and it has sat since. I've been shooting some smaller wildcats.
The 7.21 Sage is a version of the 7mm-.300 Win chambering. It has minimum case taper and a 35 degree shoulder.
Included with the barreled action will be a set of CH4D custom dies. I've shot less than 150 rounds through it. Three shot groups constantly hover at or less than 1" @ 300 yards. With some impressive velocities with H1000. Only powder I have shot with it. I bet RL-26 would shine.
Remington 700, stainless, Right hand action. Purchased new.
27 3/4" Schneider, stainless, 3 1/2 contour, 1-8 twist P5 barrel
Wyatt's extended mag box/ action machined to fit
Timney trigger set at about 2 1/2 lbs.
Reinforcement bolt handle screw installed
Stainless muzzle brake
Blasted to a dull finish
Factory BDL bottom metal with a PTG floor plate Cerakoted to match.
It is great like it is or a 28 Nosler reamer would clean the current chamber right up.
I did not have the chambering designation engraved on the barrel.
Located in the Wenatchee, WA area.
$800.00 Shipped
300 yards. My hunting load. Took a deer at just shy of 850 yard with this combo.
7.21 Sage (Left)
7mm Mag case (Right)
I will seperate.
Action, with bottom metal, action screws, Wyatt's extended box( Machined to fit), Timney trigger. Action face has been trued. Bolt handle reinforcement screw installed. Complete action as pictured. $500.00 Shipped.
Schneider 7mm (.284) stainless barrel , 3 1/2 contour, 27 3/4", 1-8 twist , muzzle break. No engraving on the barrel. Round count less than 150. Would be great for rechambering to a 28 Nosler or such. $300.00 Shipped.
Will sell the barrel, along with the 7.21 Sage reamer and custom dies for $450.00 Shipped.
The 7.21 Sage is a version of the 7mm-.300 Win chambering. It has minimum case taper and a 35 degree shoulder.
Included with the barreled action will be a set of CH4D custom dies. I've shot less than 150 rounds through it. Three shot groups constantly hover at or less than 1" @ 300 yards. With some impressive velocities with H1000. Only powder I have shot with it. I bet RL-26 would shine.
Remington 700, stainless, Right hand action. Purchased new.
27 3/4" Schneider, stainless, 3 1/2 contour, 1-8 twist P5 barrel
Wyatt's extended mag box/ action machined to fit
Timney trigger set at about 2 1/2 lbs.
Reinforcement bolt handle screw installed
Stainless muzzle brake
Blasted to a dull finish
Factory BDL bottom metal with a PTG floor plate Cerakoted to match.
It is great like it is or a 28 Nosler reamer would clean the current chamber right up.
I did not have the chambering designation engraved on the barrel.
Located in the Wenatchee, WA area.
$800.00 Shipped
300 yards. My hunting load. Took a deer at just shy of 850 yard with this combo.
7.21 Sage (Left)
7mm Mag case (Right)
I will seperate.
Action, with bottom metal, action screws, Wyatt's extended box( Machined to fit), Timney trigger. Action face has been trued. Bolt handle reinforcement screw installed. Complete action as pictured. $500.00 Shipped.
Schneider 7mm (.284) stainless barrel , 3 1/2 contour, 27 3/4", 1-8 twist , muzzle break. No engraving on the barrel. Round count less than 150. Would be great for rechambering to a 28 Nosler or such. $300.00 Shipped.
Will sell the barrel, along with the 7.21 Sage reamer and custom dies for $450.00 Shipped.
- I agree to the classified rules and terms of service
Last Edited: