- Messages
- 127
- Reactions
- 0
I have a 10/22 I built. I am interested in listening to reasonable offers. I have around $700 into it. Comes with three stock ruger 10rnd mags I also have the original 18.5" SS barrel and the black synthetic stock which is not counted in the $700 it cost me to built this one. This rifle also have the metal trigger group. I got this rifle from a guy who bought it brand new in 1999 and he had not fired no rounds through it. I have put about 400 rnds through it and I have not had a issue. I will list the products used in this build below. I have box's for most of all the items from when I got them new. Gun has been built for about 3 months.
Boyds Barracuda RH stock in Nutmeg. I finished it with a Tru Oil finish after doing a lot of sanding on it.
Polished Bolt
Polished Charging Handle
DNZ One Piece Scope Mount
SS Green Mountain Fluted Bull barrel. 20"
Tuffer Buffer
VQ Target Hammer, Reduced trigger pull from around 8.5lbs to 3lbs.
Did some polishing of some internals.
Got a BSA Contender 6x24x40mm scope
Extra Set of Weaver rings
Have a BiPod which is not mounted cause I have not yet put a sling stud on stock yet.
Auto Bolt Release
VQ trigger return spring
VQ Bolt Catch spring
Also have a Tru Glow Red/Green dot scope I can throw in for the right deal.
Pm me with questions and trade offers.
Boyds Barracuda RH stock in Nutmeg. I finished it with a Tru Oil finish after doing a lot of sanding on it.
Polished Bolt
Polished Charging Handle
DNZ One Piece Scope Mount
SS Green Mountain Fluted Bull barrel. 20"
Tuffer Buffer
VQ Target Hammer, Reduced trigger pull from around 8.5lbs to 3lbs.
Did some polishing of some internals.
Got a BSA Contender 6x24x40mm scope
Extra Set of Weaver rings
Have a BiPod which is not mounted cause I have not yet put a sling stud on stock yet.
Auto Bolt Release
VQ trigger return spring
VQ Bolt Catch spring
Also have a Tru Glow Red/Green dot scope I can throw in for the right deal.
Pm me with questions and trade offers.