- Messages
- 351
- Reactions
- 5
I will consider trades, only thing I am looking for is Lone Eagle or Competitor pistol in .308 or larger caliber. Reloading equipment is always good. 416 Ruger bullets/brass. .375 Barnes bullets. Also 32-20 brass. Leupold Vari-X II scopes too.
Please post, "I will take...." if you want it, but I will not consider the deal finalized until we have exchanged emails, texts or a phone call. At that time, it will be marked as "sold pending FTF". I will do my absolute best to go in order, but the best way to insure your "place" in the order list is to text me.
I do NOT sell junk. I back up what I am selling and will make it right with you if an unknown problem pops up. I would only sell guns, ammo, and components that I would shoot myself. I WILL NEVER INTENTIONALLY RIP SOMONE OFF. Just call me and I will make it right.
If you don't think my prices are right, let me know. But, don't try to rip me off, my prices (as far as I was able to research them) are pretty firm. I don't need your lowball offers. If you buy in quantity, I am willing to discount 10% or so.
Randy 541-306-1399
I will be adding much more to the list, so check back often!
Equipment:
Used Dillon RL550B with everything that comes standard from the factory, has conversion for .223/.204 installed, I can swap you a different one if need be (I definitely have 44mag/special, .45acp, and 9mm/38 super, possibly others) $295
Chrony Master Gamma New in Box $195
RCBS Case Length Gauge (dial calipers) in box and case with all instructions and paperwork $15
Forster Bench Rest Die Set for .308, excellent, $30
Hornady Custom grade new dimension dies FL .223, new in box $35
Hornady Custom grade new dimension dies FL .204, new in box $35
Hornady Custom grade new dimension dies FL .308, new in box $30
RCBS carbide seater die .30 carbine, excellent $20
RCBS bell-mouth die for .30 carbine, excellent $10
Lee carbide sizer die for .30 carbine, outside is marked up, inside is excellent $15
Lee crimp die for .30 carbine, very good, $10
RCBS FL Die Set .270, Brand new in box, $30
RCBS FL Die Set 30-30, brand new in box, $25
RCBS FL Die Set .300 Win Mag, excellent condition/like new, $28
RCBS 3-die Carbide Set .44mag /44 special,brand new, $42
RCBS 3-die set (not carbide) .44mag/44 special, brand new in box $25
RCBS 22-250 FL Die Set, excellent, like new $30
RCBS 7mm Remington Magnum FL Die Set, excellent, $28
RCBS .270 Win FL Die Set, excellent, excellent $27
RCBS 3-die Carbide Set .45acp, excellent $35
RCBS 3-die Carbide Set .25acp (25 auto), new in box $55
RCBS 3-die set (not carbide) .357/.38 SWC $24
RCBS Decap Die .27-.45cal Heavy Duty, brand new, $20
RCBS Trim Mate Case Prep Center, brand new in box, $110
RCBS Primer tray -2, very good $7 each (have 2)
RCBS Primer tray, like new, $7
RCBS lube pads, lightly used, excellent $5-7
RCBS case loading block excellent, $6 (have 4 or 5)
RCBS 30-06 trim die, excellent $20
RCBS 222 Remington trim die, NEW in Box $22
RCBS 225 Remington trim die, NEW in Box $22
RCBS 270 Remington trim die, NEW in Box $22
Redding Body die 22-250, as new $17
Redding neck die, 22-250, very good $20
Lee 284 Die set, new in box with powder measure, $25
CH 284 Die set, missing expander ball, brand new in box, $20
Lyman die set 7mm-08, brand new, $18
Redding powder measure stand, excellent $20
RCBS Primer pocket Swager combo, new in box $20 (2 of these)
RCBS powder trickler, excellent $10
RCBS powder funnels, good to excellent $4-6 (have about 10)
RCBS .17 caliber funnel, excellent $8
RCBS hand priming tool, brand new $30 (have 2 or 3)
Thumler's Tumbler Ultra Vibe 18, works great $100 (retails well over $300!)
Dillon Eliminator Scale, like new, $55
Lyman 1200 Auto-Flo (very nice) $60 (retails for $92 at Midway)
Black media separator (looks like a gold pan but with holes for the media to sift out of your brass) $5
Lyman 6# Easy-Pour Corncob Green treated cleanining or tumbling media $12
Lyman Turbo 3200 Brass Tumbler:
To meet the special needs of the high volume reloaders Lyman offers our Large Capacity 3200 Model. The 3200 will clean 1000 .38 special cases per cycle. Features heavy duty frame and motors.
Retails for $213! This unit just came back from the factory with an entirely new bottom end (motor, suspension, etc). Comes full of walnut media for just $120
Dillon Magnum FL-2000 Brass Tumbler $110
Please post, "I will take...." if you want it, but I will not consider the deal finalized until we have exchanged emails, texts or a phone call. At that time, it will be marked as "sold pending FTF". I will do my absolute best to go in order, but the best way to insure your "place" in the order list is to text me.
I do NOT sell junk. I back up what I am selling and will make it right with you if an unknown problem pops up. I would only sell guns, ammo, and components that I would shoot myself. I WILL NEVER INTENTIONALLY RIP SOMONE OFF. Just call me and I will make it right.
If you don't think my prices are right, let me know. But, don't try to rip me off, my prices (as far as I was able to research them) are pretty firm. I don't need your lowball offers. If you buy in quantity, I am willing to discount 10% or so.
Randy 541-306-1399
I will be adding much more to the list, so check back often!
Equipment:
Used Dillon RL550B with everything that comes standard from the factory, has conversion for .223/.204 installed, I can swap you a different one if need be (I definitely have 44mag/special, .45acp, and 9mm/38 super, possibly others) $295
Chrony Master Gamma New in Box $195
RCBS Case Length Gauge (dial calipers) in box and case with all instructions and paperwork $15
Forster Bench Rest Die Set for .308, excellent, $30
Hornady Custom grade new dimension dies FL .223, new in box $35
Hornady Custom grade new dimension dies FL .204, new in box $35
Hornady Custom grade new dimension dies FL .308, new in box $30
RCBS carbide seater die .30 carbine, excellent $20
RCBS bell-mouth die for .30 carbine, excellent $10
Lee carbide sizer die for .30 carbine, outside is marked up, inside is excellent $15
Lee crimp die for .30 carbine, very good, $10
RCBS FL Die Set .270, Brand new in box, $30
RCBS FL Die Set 30-30, brand new in box, $25
RCBS FL Die Set .300 Win Mag, excellent condition/like new, $28
RCBS 3-die Carbide Set .44mag /44 special,brand new, $42
RCBS 3-die set (not carbide) .44mag/44 special, brand new in box $25
RCBS 22-250 FL Die Set, excellent, like new $30
RCBS 7mm Remington Magnum FL Die Set, excellent, $28
RCBS .270 Win FL Die Set, excellent, excellent $27
RCBS 3-die Carbide Set .45acp, excellent $35
RCBS 3-die Carbide Set .25acp (25 auto), new in box $55
RCBS 3-die set (not carbide) .357/.38 SWC $24
RCBS Decap Die .27-.45cal Heavy Duty, brand new, $20
RCBS Trim Mate Case Prep Center, brand new in box, $110
RCBS Primer tray -2, very good $7 each (have 2)
RCBS Primer tray, like new, $7
RCBS lube pads, lightly used, excellent $5-7
RCBS case loading block excellent, $6 (have 4 or 5)
RCBS 30-06 trim die, excellent $20
RCBS 222 Remington trim die, NEW in Box $22
RCBS 225 Remington trim die, NEW in Box $22
RCBS 270 Remington trim die, NEW in Box $22
Redding Body die 22-250, as new $17
Redding neck die, 22-250, very good $20
Lee 284 Die set, new in box with powder measure, $25
CH 284 Die set, missing expander ball, brand new in box, $20
Lyman die set 7mm-08, brand new, $18
Redding powder measure stand, excellent $20
RCBS Primer pocket Swager combo, new in box $20 (2 of these)
RCBS powder trickler, excellent $10
RCBS powder funnels, good to excellent $4-6 (have about 10)
RCBS .17 caliber funnel, excellent $8
RCBS hand priming tool, brand new $30 (have 2 or 3)
Thumler's Tumbler Ultra Vibe 18, works great $100 (retails well over $300!)
Dillon Eliminator Scale, like new, $55
Lyman 1200 Auto-Flo (very nice) $60 (retails for $92 at Midway)
Black media separator (looks like a gold pan but with holes for the media to sift out of your brass) $5
Lyman 6# Easy-Pour Corncob Green treated cleanining or tumbling media $12
Lyman Turbo 3200 Brass Tumbler:
To meet the special needs of the high volume reloaders Lyman offers our Large Capacity 3200 Model. The 3200 will clean 1000 .38 special cases per cycle. Features heavy duty frame and motors.
Retails for $213! This unit just came back from the factory with an entirely new bottom end (motor, suspension, etc). Comes full of walnut media for just $120
Dillon Magnum FL-2000 Brass Tumbler $110
Last Edited:
