- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- City
- Oregon City
- State
- Oregon
Thes 4 stocks all fit mil-spec tubes note the one on the far left had the lip removed. The second one from the right could be a squeeze on a smaller diameter commercial tube as they do vary.
From left to right
1. $15
2. $15 (SOLD)
3 $15 OR $10 With any other purchase
4 $15 OR $10 With any other purchase (SOLD)
3 mil-spec diameter tubes. I believe the 2 on the right are spikes tactical the other is unknown $25 each or $20 each if you buy all 3.
The butt pad is $10 or $5 with another purchase or free with mulitpurchase
MORE PARTS
Colt and FN parts Sp1 and M4 and A2
www.northwestfirearms.com
Flat top low profile ar15 upper with Anderson barrel
www.northwestfirearms.com
M4A2 Carbine style upper
www.northwestfirearms.com
264 LBC (6.5 Grendel) Type 2 Complete Upper For those of you what to hunt with your Ar15
www.northwestfirearms.com
Dedicated .22 Ar15 Car-15 M4 upper.
www.northwestfirearms.com
From left to right
1. $15
2. $15 (SOLD)
3 $15 OR $10 With any other purchase
4 $15 OR $10 With any other purchase (SOLD)
3 mil-spec diameter tubes. I believe the 2 on the right are spikes tactical the other is unknown $25 each or $20 each if you buy all 3.
The butt pad is $10 or $5 with another purchase or free with mulitpurchase
MORE PARTS
Colt and FN parts Sp1 and M4 and A2
Colt Ar15 SP1 Upper receiver $185 and Bolt carrier Group $125
Sp1 upper receiver in excellent condition except for the ejection port cover which I believe is still a colt just not era correct $185 this has the tiny colt proof marks in front of the ejection port with no other markings Colt Sp1 bolt carrier group C marked Carrier MPC marked Bolt $135 This...
www.northwestfirearms.com
Flat top low profile ar15 upper with Anderson barrel
Ar15 Flat top upper with 16" barrel $160
The gas block is buggered up because it's really tight which is a good thing. $160 no BCG and CH. Trades wanted Colt Ar15 Parts. Plastic 80% lower with Jig kit, Left-handed Ar15 parts and accessories.
www.northwestfirearms.com
M4A2 Carbine style upper
M4A2 Carbine style upper
Unknown Brand upper barrel is not chrome lined. The receiver does have some finish wear on the carry handle so don't expect a safe queen FSB uses a roll pin or straight pin not taper pins but it solid (no Bolt carrier group or charging handled) $250 Or would trade for or towards a Colt A1 or A2...
www.northwestfirearms.com
264 LBC (6.5 Grendel) Type 2 Complete Upper For those of you what to hunt with your Ar15
264 LBC (6.5 Grendel) Type 2 Complete Upper with Carbon Fiber FF tube $335 OPTIONS ADDED
This is a complete upper barrel is a BHA 264LBC 16" 1/9 twist. The barrel nut on the lightweight heat-dissipating carbon fiber float tube is a little chewed up but unless you are removing it, it is fine. It's complete with BCG and CH. less than 300 rds fired. If you don't want the float tube I...
www.northwestfirearms.com
Dedicated .22 Ar15 Car-15 M4 upper.
WTS .22 M4A2 upper with spikes barrel Choice of A2 or A3 receiver READ OPTIONS
This does not include the .22 conversion kit. but should work with most .22 conversion kits. This uses a spikes barrel. Spikes dedicated .22 barrel with A2 upper receiver. The A2 had a blem as shown in the photo but I can replace it with a new receiver for an additional cost. Optional collar...
www.northwestfirearms.com
Last Edited:
