Bushy AR, Ammo All SPF

Status
Not open for further replies.
Messages
16
Reactions
0
Feedback: 0 / 0 / 0
Priorities have changed in my life, and going back to school for my EMT-B takes precedence over shooting sports. So, I've decided to sell my AR and all associated gear. Bushy A3 HBAR, bought back in 05 I believe. YHM Customizable FF tube, A2 stock, BlackHawk sling, thread protector plus A2 style comp. Tasco scope and riser, bi-pod, 19 mags. Approximately 4570rnds of ammo, majority is 55FMJ-H335, 1470 rnds are SS109-H335, mixed VMax, SP, 69SMK, 200rnds of 2X 55-H335. There's close to 1K of .223 brass, a handful of .40 and a few hundred .45 cases. One unopened pound of H335, a few partials of Varget, TiteGroup, Win748, H335, and AA2230 (VMax load). 200VMax, 200-300 55FMJ, partial of 52HP (75 I think), 500-600 CCI400's, a few hundred CCI300's, maybe 50 CCI450's, and a mixed bag of several hundred 209's. Misc. trays, tubs, boxes. Pretty much what you see in the pics. Misc. cleaning kit pieces, hard case, pretty much whats in the pic. Reloading gear includes the following.
RCBS Turret Press
Lee Pro1000 .40S&W
RCBS UniFlow
RCBS TrimPro2
Lyman Pro1200 Tumbler
Lyman 1000XP Digital Scale
Lee Powder Measure
Lee Beam Scale
Lee Hand Primer
Lee Hand Primer Shell Holders
RCBS .22cal 3way Cutter
RCBS Primer Pocket Swager
RCBS .45 Carbide Die Set
RCBS #3 Shell Holder
RCBS .223 FL Die Set
RCBS #10 Shell Holder
Lee .223 Die Set w/Factory Crimp Die
RCBS Lube Pad
Lee Powder Funnel
RCBS Case Block
MTM Case Block
RCBS Powder Trickler
Lee Small Decapper
Lyman Flash Hole Uniformer
RCBS Chamfer/Debur Tool
RCBS Primer Pocker Brush w/Handle
Lee Primer Pocket Cleaners (2)
Lee Chamfer Tool
Misc Lee Trimmers
16 MTM 100rnd Pistol Boxes
6 MTM/Dillon 50rnd Pistol Boxes
2 MTM 100rnd Small Rifle Boxes
1 MTM 50rnd Small Rifle Box

Plans changed, all reloading gear and components SPF local, everything else is $1300.
FTF in Philomath at my store, NO TRADES. The ammunition is being sold "as components", meaning it is my understanding that the purchaser is going to salvage the components and reload them according to their load data. In other words, what you do with it is your business. If you post "I'll take it", I'm assuming you are willing to pay the full asking price, otherwise either email or PM me if you aren't offering the asking price. Again, NO TRADES. Email me at jpierceazak@hotmail.com
EE003.jpg
009.jpg
006.jpg
007-1.jpg
008-1.jpg
001.jpg
003-1.jpg
002.jpg
004.jpg
006-1.jpg
005-1.jpg
 
Status
Not open for further replies.

UPCOMING EVENTS

Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
DRRC .22 Rimfire Challenge Oct 10
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA
Oregon State Steel Challenge Championship
Central Oregon Shooting Sports Association
Millican, OR 97701, USA
Miller's Quarry Clean-Up
Miller's Quarry
Miller Rd, Mt Hood Village, OR 97067, USA
Free Firearms Safety Course (I-1639 Compliant)
Virtual Webinar (Zoom)
Seattle, WA, USA

LATEST RESOURCE REVIEWS

  • J&B Firearm Sales
    5.00 star(s)
    Good local shop
    Picked up a rifle yesterday from J&B. This was the second or third gun purchase over the last few years from them. I always enjoy stopping by...
  • H&K Gun Shop
    5.00 star(s)
    The only place I have found 9mm in stock
    I’ll admit I didn’t even know this place existed, as I don’t tend to go into Forest Grove often. But it’s a giant (looks bigger from the...
  • Revelation Arms
    4.00 star(s)
    Depends who answers the phone
    I was given the number to Roger Loock by Beaver Creek Armory, as I needed parts I had ordered from MCarbo installed on a Kel-Tec Sub2000. On my...
  • Coastal Farm & Ranch - Cornelius
    3.00 star(s)
    Lesson learned
    I’ll take some responsibility here, as I took the employee at their word instead of doing a thorough inspection. Short story is that I asked for a...
  • MK Tactical
    5.00 star(s)
    Good guys!
    I stop in here every once in a while to see what Michael has in the clearance section, and to ask questions when I have a project in mind...
Top Bottom