Quantcast
  1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!

bushmaster predator upper.

Discussion in 'Part & Accessory Classifieds' started by jer fly, Apr 5, 2011.

  1. jer fly

    jer fly cottage grove Member

    Messages:
    213
    Likes Received:
    11
    Like new, with less than 100 rounds fired. bushmaster .223 1/8 twist 20'' barrel free float hand guard and 1/2'' risers for scope. sorry no pics yet, but it is truly as new, so if you look up on bushmaster site you will see what you get. FTF in Cottage Grove, Oregon. $600. can send pics on phone.. may take trade or part trade for remington 700, AR stuff, S&W revolver's, or might add cash for the right kimber.
     
    Last edited: Apr 24, 2011
  2. Ian1816

    Ian1816 Oregon City Active Member

    Messages:
    439
    Likes Received:
    36
    Is the barrel stainless? Bull barrel?
     
  3. jer fly

    jer fly cottage grove Member

    Messages:
    213
    Likes Received:
    11
    Adapted from our very accurate and successful 24" Varminter, the Predator Upper Receiver/Barrel Assembly's 20" Fluted Extra Heavy Barrel is button rifled 1 x 8" to stabilize the heavier 69-77 grain bullets that a predator hunter/caller would choose for bigger varmints and predators. This superb barrel features fluting for increased cooling and weight reduction; an 11 degree competition crown; 1" diameter heavy profile under the handguard; custom match hybrid chamber with a tighter SAAMI Spec headspace from the shoulder of the chamber to the bolt face, and longer chamber throat or "Leade". This chamber accommodates 5.56mm ammunition without developing higher pressures encountered when firing 5.56mm ammo in a .223 chamber with shorter "Leade" (both calibers can be used safely). This Upper is sold complete with Bolt, Bolt Carrier and Charging Handle to ensure positive lockup between bolt and barrel extension. The Predator Upper also features a Vented Tubular Aluminum Free-Floater Forend with Bipod Stud (free-floats the barrel from the barrel nut forward) and B.M.A.S. 1/2" Mini-Risers to add scope height for correct sight picture and comfortable cheek weld.
     
    bmgm37 and (deleted member) like this.
  4. bluecz97b

    bluecz97b Gresham Member

    Messages:
    108
    Likes Received:
    4
    pm sent
     
  5. jer fly

    jer fly cottage grove Member

    Messages:
    213
    Likes Received:
    11
    BTT.
     
  6. jer fly

    jer fly cottage grove Member

    Messages:
    213
    Likes Received:
    11
    BTT with added info.
     
Thread Status:
Not open for further replies.