Barreled parts kit

[Savage Jav]

Not as cheap as they use to be but not too bad for us builders.

WASR-10 AK-47 7.62x39 Parts Kit with Romanian Populated Barrel

centerfiresystems.com

Read More

 

[kmk1012]

Are these difficult to complete? Any welding? I've got zero knowledge of them.

 

[Savage Jav]

Are these difficult to complete? Any welding? I've got zero knowledge of them.

If you have the tools no. Barrel, trunion, gas block and front sight are all press fit and pinned to each other. Many guys dont have a press or dont want to deal with the hassle. Once the barrel assembly is pressed the rest is riveted in place on the receiver.

 

[medicman29]

the gas port on the barrels is not drilled out, so that has to be done also.

 

[Knebel]

Very easy to do with screws. I have build 2 aks using machine screws instead of rivets and they are still fine after thousands of rounds. I gently coat the trunnion areas with...JB weld and then screw it together with rrd loctite on the screws... no problem at all.

 

[Savage Jav]

Very easy to do with screws. I have build 2 aks using machine screws instead of rivets and they are still fine after thousands of rounds. I gently coat the trunnion areas with...JB weld and then screw it together with rrd loctite on the screws... no problem at all.

Dont think I would recommend this way

 

[Knebel]

I disagree.