- Messages
- 1,219
- Reactions
- 2,897
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Bought a few thousand .45ACP mixed range brass out of Texas. Processing since last weekend as time allows. This poor dude had a bad day. Primer pierce/blow out and bulged the brass bad. Just going into the brass recycling bin, but yikes!
View attachment 732857
That's a weird blowout!
The primer blowouts I have seen have never looked like this.
It is way too 'smooth' - almost looks like a drilled hole.
What causes this? It almost looks like a small brass plate overlay.
I have never seen anything like that...
View attachment 734534
"Winchester Whitebox"
Honestly I have bought a metric bubblegum ton of WWB and cannot remember anything that was bad with them and I have many 40S&W Win cases that are on their 3rd firings.
I have seen a lot of cases that are damaged by the firearms they were shot through though.
Honestly I have bought a metric bubblegum ton of WWB and cannot remember anything that was bad with them and I have many 40S&W Win cases that are on their 3rd firings.
I have seen a lot of cases that are damaged by the firearms they were shot through though.
Wouldn't that cause the entire casing to expand, though? This is just around where the bullet was and at a funky angle, too.You found it! I know EXACTLY how that happened...
It's what happens when oneaccidentallystupidly loads a 9mm into the mag of one's .40 S&W and then proceeds to get the damned thing stuck like a barnacle in the chamber after it goes *pop*...
Personal experience?I know EXACTLY how that happened...
It's what happens when oneaccidentallystupidly loads a 9mm into the mag of one's .40 S&W and then proceeds to get the damned thing stuck like a tick on a hound in the chamber after it goes *pop* instead of BANG!!!