- Messages
- 24
- Reactions
- 11
Bought this used in 2007 from a LGS, looked like it did not have very many rounds through it. I put less than 500 rounds through.
16" with BUIS (Arms 40 rear)
5.56/.223
LaRue Tactical 9.0" Handguard LT15-9
9.0 inch free-floating handguard with LaRue Locking System.
The 9.0's length stops just past a carbine-length gas block, providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures..
Features:
· Weighs .854lb
· CNC-machined out of aluminum
· Integral QD sling-swivel sockets on both sides
· Hard coat anodized, with T-Numbers
· Low-profile bottom and side rails
· Special rail cuts allow both mil-issue and standard rail covers
Falcon Ind. Ergo grip
JP Rifles Fire Control system installed at JP rifles to competition 3 lbs trigger pull and
JP Rifles Ambi Safety
JP Fire Control Package for .154 small pin receivers consisting of a JP trigger with engagement and overtravel screws and disconnector spring installed as an assembly, JP speed hammer, two JP oversized anti-walk pins.
3.0-3.5 Pound competition/recreational yellow hammer and trigger spring
River Adjustable stock
Comes with 1-30rd magazine.
Asking SOLD.
No trade offers please.
I'm in North Seattle.
call or text: 206-818-1101
email: [email protected]
-Albert
16" with BUIS (Arms 40 rear)
5.56/.223
LaRue Tactical 9.0" Handguard LT15-9
9.0 inch free-floating handguard with LaRue Locking System.
The 9.0's length stops just past a carbine-length gas block, providing true free-float. Our two-pin proprietary barrel nut system with its locking anti-slip plate, sets LaRue handguards apart from the competition. Once properly installed, there is no chance of movement whatsoever. The side and bottom rails are tucked closer to the barrel, keeping the profile narrower and more streamlined. LaRue handguards also include integral QD sling-swivel sockets at the base of each side for convenient mounting 2-point slings. Additionally, our Free-float Rail system provides an excellent heat-sinking feature that pulls throat-damaging heat away from the chamber area. Another heat-sinking benefit is the elimination of pressure-spikes, which some feel is the cause of a large part of pre-mature bolt failures..
Features:
· Weighs .854lb
· CNC-machined out of aluminum
· Integral QD sling-swivel sockets on both sides
· Hard coat anodized, with T-Numbers
· Low-profile bottom and side rails
· Special rail cuts allow both mil-issue and standard rail covers
Falcon Ind. Ergo grip
JP Rifles Fire Control system installed at JP rifles to competition 3 lbs trigger pull and
JP Rifles Ambi Safety
JP Fire Control Package for .154 small pin receivers consisting of a JP trigger with engagement and overtravel screws and disconnector spring installed as an assembly, JP speed hammer, two JP oversized anti-walk pins.
3.0-3.5 Pound competition/recreational yellow hammer and trigger spring
River Adjustable stock
Comes with 1-30rd magazine.
Asking SOLD.
No trade offers please.
I'm in North Seattle.
call or text: 206-818-1101
email: [email protected]
-Albert
