AR500 steel gong targets $83/set

Not open for further replies.
Feedback: 6 / 0 / 0
SOLD! :cool:

Hey guys, I've gotten so many requests to do another run that after a year of searching I finally found the material at a great price, so here we go....

Most places only sell 3/8" which doesn't hold up too well with .223/5.56 since it's such a small high velocity round. I decided to just buy a sheet of 1/2" thick AR500 steel and have targets made to my specs. This stuff can withstand a 50BMG fmj round at 100yds with little to no damage!

Shooting steel is a lot fun since you get a nice "ping" when you hit the plate! These targets are 1/2" thick AR500 steel and should last a long time when shot with FMJ, HP, or SP ammo at 100yds or greater.

Each set includes two 1/2" thick AR500 plates: one 10"x10" & one 6"x6". Each plate has a 1/2" mounting hole cut out at each top corner for easy hanging from your target stand. Targets will have a light coat of white spray paint which makes it easy to see where you hit, almost like a shoot-n-see target. The set weighs about 20lbs. It is best to hang and/or slightly angle the plates slightly downward to prevent ricochets and deflect any shrapnel into the ground.

Look at my old thread for pics of used and abused targets as well as my first impression. I'll post a pic of my 1yr+ old target when I get back in town, but it still looks like new! If you have any doubt as to the quality of these targets I can tell you that I've had numerous guys buy second and third sets after having one and multiple guys wish they had bought more when I was sold out.

or 10"x10" only: $62ea (12 0 available)
+ $11 flat rate shipping (Can fit up to 2 sets + one 10" per box )


Will ship via USPS priority flat rate.
I accept USPS MO, discreet pp "gift", or discreet pp +3.4%. Please specify when you PM me.
FTF is ok in the Charlotte, NC area
Last edited by a moderator:
Feedback: 6 / 0 / 0

Many pre-sold but still plenty to go around.

From a member from another site who got a set from an earlier batch:
1 .30-06 150gr fmj
2 5.56mm m193
3 5.56mm m855
All were shot from less than 25 yards.
Last edited by a moderator:
Not open for further replies.


Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
DRRC .22 Rimfire Challenge Oct 10
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA
Oregon State Steel Challenge Championship
Central Oregon Shooting Sports Association
Millican, OR 97701, USA
Miller's Quarry Clean-Up
Miller's Quarry
Miller Rd, Mt Hood Village, OR 97067, USA
Free Firearms Safety Course (I-1639 Compliant)
Virtual Webinar (Zoom)
Seattle, WA, USA


  • Triple B Guns
    5.00 star(s)
    Triple B Guns
    This isn't really a review as we own the store but rather an invitation to come down and visit us. We specialize in hard to find unique guns but...
  • J&B Firearm Sales
    5.00 star(s)
    Good local shop
    Picked up a rifle yesterday from J&B. This was the second or third gun purchase over the last few years from them. I always enjoy stopping by...
  • H&K Gun Shop
    5.00 star(s)
    The only place I have found 9mm in stock
    I’ll admit I didn’t even know this place existed, as I don’t tend to go into Forest Grove often. But it’s a giant (looks bigger from the...
  • Revelation Arms
    4.00 star(s)
    Depends who answers the phone
    I was given the number to Roger Loock by Beaver Creek Armory, as I needed parts I had ordered from MCarbo installed on a Kel-Tec Sub2000. On my...
  • Coastal Farm & Ranch - Cornelius
    3.00 star(s)
    Lesson learned
    I’ll take some responsibility here, as I took the employee at their word instead of doing a thorough inspection. Short story is that I asked for a...
Top Bottom