- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- City
- Oregon City
- State
- Oregon
AR-15 SLICKSIDE UPPER receiver Has some scratches on the edge behind the sight
has port cover and sight assembly has some blems on the edges $170
C7 upper receiver has forward assist, Dust cover, and forward assist assembly, does have a scratch on the windage wheel has feed ramps $185 (SOLD)
Colt Keyhole forge code upper receiver. It is not C marked as Colt for some dumb reason stopped marking their later A2s. It has some surface scratches. Small front takedown pin size Black, not grey $200
Stripped Colt A2 upper receiver large front takedown $155 as shown in the photo I can install an aftermarket A2 sight assembly and forward assist and dust cover bringing the price to $200
Colt A1 buffer tube with spring and buffer $55 each
Buffer tube without spring and buffer $40
Colt Carbine Handgaurds $80
Colt m16 sp1 Skinny Barrel .625 front sight base $45
A1 flash hider $15
Handguard front retainer $10
A1 handguards $35 per set 1 side is used VG colt 1 side is NOS aftermarket. I have a couple sets like this
This set $40 (sold the pictured set but have others like it) 1 side is used VG colt 1 side is NOS aftermarket. (SOLD)
Charging Handles from left to right
Retro off a PWA $25
Colt Dark Grey also have black ones $40
Maybe spikes not sure $25
Smith Enterprise Bolt Carrier group $100 (SOLD)
Colt M16 Bolt Carrier group "C" marked carrier "MPC" Marked Bolt $150 (SOLD)
PM marked Gray A1 upper receiver stripped $155 I can install aftermarket Sight, Dust cover and forward assist bringing the price to $200 (SOLD)
Colt A1 buttstock complete $100 (SOLD)
Flat top upper receivers All have M4 feedramps.
Top is new A forge code $69 stripped (TRADED)
Middle Cardinal forge has finish ware on edges $70 forward assist and dust cover have been installed since the photo was taken (TRADED)
Bottom has damaged Forward assist port lot of ware around it I don't think a forward assist can be installed on it $30 stripped (sold)
Milspec diameter buffer tubes one has buggered threads but still holds tight $20 (SOLD)
the other one has the extended lip that goes into the receiver to cradle the but of the bolt carrier $25
Other parts not pictured,
Used Enidine Hydraulic Recoil Buffer used in good and functional condition for rifle tube $50
A2 front sight bases F marked and not F marked $35 each
Shaved A2 sight bases to be used low profile gas blocks need to be painted. $10 each or $5 with any other purchase
A2 Grips $5 each with other purchase
Delta Ring assemblies $20 each
BushMaster Izzy flash hider this is the 1.5" one used to pin 14.5 barrels to 16" $20
first gen black dog .22 conversion mags $15 each.
I do have some commercial and mil-spec waffle stocks for $15 each as well just the bodies (NO LONGER AVAILABLE)
TRADES WANTED
Bushnell Variable scope with rain guard.
budget 1-4 or 1-6 Scope or 1-8 scope like under $200 it's going on a .22
A2 rear sight assembly,
Retro Style Car15 stock bodies,
Upper receivers Prefer M16, A1 or A2 but flat tops as well.
Carry Handle,
Like new Colt Side sling swivel,
US Made HK91, PTR, G3, Cetme parts,
1 PC scope mounts budget one for a.22,
14.5" M4 barrel.
Left-handed .22 conversion kit.
A1 rear sight assembly.
Left CMMG or Stag Arms .22 Conversion Kit or parts
A Carry handle receiver. A1 or A2.
Rifle Cases
20" or larger Screen computer Monitor
Adobe Cs6
1/12 twist rate barrels even Frankenstein project barrels
Colt Ar15 parts just about any.
Xd9 mags
if someone does window tinting or car stereo installs
Fenix weapon lights
Left-handed ar15 parts
16" .308 AR-style barrel low or no rds
Muddy girl stock and grip
$5-7 dollar ar15 mags
Benelli R1 Piston for 300wm.
30.06 Hunting rifle $200-400 range depending on make model and accessories. Prefer Winchester, Howa, Savage with accutrigger.
has port cover and sight assembly has some blems on the edges $170
C7 upper receiver has forward assist, Dust cover, and forward assist assembly, does have a scratch on the windage wheel has feed ramps $185 (SOLD)
Colt Keyhole forge code upper receiver. It is not C marked as Colt for some dumb reason stopped marking their later A2s. It has some surface scratches. Small front takedown pin size Black, not grey $200
Stripped Colt A2 upper receiver large front takedown $155 as shown in the photo I can install an aftermarket A2 sight assembly and forward assist and dust cover bringing the price to $200
Colt A1 buffer tube with spring and buffer $55 each
Buffer tube without spring and buffer $40
Colt Carbine Handgaurds $80
Colt m16 sp1 Skinny Barrel .625 front sight base $45
A1 flash hider $15
Handguard front retainer $10
A1 handguards $35 per set 1 side is used VG colt 1 side is NOS aftermarket. I have a couple sets like this
This set $40 (sold the pictured set but have others like it) 1 side is used VG colt 1 side is NOS aftermarket. (SOLD)
Charging Handles from left to right
Retro off a PWA $25
Colt Dark Grey also have black ones $40
Maybe spikes not sure $25
Smith Enterprise Bolt Carrier group $100 (SOLD)
Colt M16 Bolt Carrier group "C" marked carrier "MPC" Marked Bolt $150 (SOLD)
PM marked Gray A1 upper receiver stripped $155 I can install aftermarket Sight, Dust cover and forward assist bringing the price to $200 (SOLD)
Colt A1 buttstock complete $100 (SOLD)
Flat top upper receivers All have M4 feedramps.
Top is new A forge code $69 stripped (TRADED)
Middle Cardinal forge has finish ware on edges $70 forward assist and dust cover have been installed since the photo was taken (TRADED)
Bottom has damaged Forward assist port lot of ware around it I don't think a forward assist can be installed on it $30 stripped (sold)
Milspec diameter buffer tubes one has buggered threads but still holds tight $20 (SOLD)
the other one has the extended lip that goes into the receiver to cradle the but of the bolt carrier $25
Other parts not pictured,
Used Enidine Hydraulic Recoil Buffer used in good and functional condition for rifle tube $50
A2 front sight bases F marked and not F marked $35 each
Shaved A2 sight bases to be used low profile gas blocks need to be painted. $10 each or $5 with any other purchase
A2 Grips $5 each with other purchase
Delta Ring assemblies $20 each
BushMaster Izzy flash hider this is the 1.5" one used to pin 14.5 barrels to 16" $20
first gen black dog .22 conversion mags $15 each.
I do have some commercial and mil-spec waffle stocks for $15 each as well just the bodies (NO LONGER AVAILABLE)
TRADES WANTED
Bushnell Variable scope with rain guard.
budget 1-4 or 1-6 Scope or 1-8 scope like under $200 it's going on a .22
A2 rear sight assembly,
Retro Style Car15 stock bodies,
Upper receivers Prefer M16, A1 or A2 but flat tops as well.
Carry Handle,
Like new Colt Side sling swivel,
US Made HK91, PTR, G3, Cetme parts,
1 PC scope mounts budget one for a.22,
14.5" M4 barrel.
Left-handed .22 conversion kit.
A1 rear sight assembly.
Left CMMG or Stag Arms .22 Conversion Kit or parts
A Carry handle receiver. A1 or A2.
Rifle Cases
20" or larger Screen computer Monitor
Adobe Cs6
1/12 twist rate barrels even Frankenstein project barrels
Colt Ar15 parts just about any.
Xd9 mags
if someone does window tinting or car stereo installs
Fenix weapon lights
Left-handed ar15 parts
16" .308 AR-style barrel low or no rds
Muddy girl stock and grip
$5-7 dollar ar15 mags
Benelli R1 Piston for 300wm.
30.06 Hunting rifle $200-400 range depending on make model and accessories. Prefer Winchester, Howa, Savage with accutrigger.
- I agree to the classified rules and terms of service
Last Edited: