Approval of form 1

Messages
238
Reactions
125
My form 1 for SBR was approved in about three weeks. Does that mean I'm good to go? I read something about the form being approved does not mean the owner was approved. Also, it didn't say anything about getting a stamp engraved. Do I have to get one if it already has a serial number? I'm obviously new to this.
 
Messages
5,119
Reactions
7,758
Youre good to go. You do not need to engrave the serial number It has one already. You absolutely do need to engrave your makers marks. If its on a trust the full trust name and city. If its on a individual form 1 you need your name ( including middle name or initial ) and city.

Owner approved?I dont know where people come up with that stuff. The form 1 is for YOU to build a SBR. Its you and the gun. Not one or the other.
 
OP
cooperdh
Messages
238
Reactions
125
Youre good to go. You do not need to engrave the serial number It has one already. You absolutely do need to engrave your makers marks. If its on a trust the full trust name and city. If its on a individual form 1 you need your name ( including middle name or initial ) and city.

Owner approved?I dont know where people come up with that stuff. The form 1 is for YOU to build a SBR. Its you and the gun. Not one or the other.
Ok so as a single applicant I need to get my name and City engraved on it is what you are saying. Do I have to do that before I take it out to shoot? I can't believe the ATF provided no information regarding this or I completely missed it. Thanks.
 
Messages
5,119
Reactions
7,758
Yes, You missed it. Its on the form 1 instructions Name as it appears on the form and city , state. IF the caliber is not engraved on the barrel or receiver you'll need that too. Multi marked AR's need a caliber designation somewhere . Most barrels have the caliber marked so that usually takes care of that but some dont. I usually have the mag well lip marked. Some people like in the trigger well.You can do it wherever and as big as you like but most guys go small and unobtrusive.
 

UPCOMING EVENTS

Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Run the Gun Pistol
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA

LATEST RESOURCE REVIEWS

  • Money Market Pawn Shop
    5.00 star(s)
    Excellent transfer and very helpful
    Was there yesterday and had my first private party transfer done. Went really smoothly and pj was very helpful. He was willing to make an...
  • MTS Enterprises Of WA
    5.00 star(s)
    Great guy to work with!
    Joe is a great guy to work with. A++++
  • Axis Manufacturing
    5.00 star(s)
    Axis Manufacturing is a pretty small shop located near the Spokane County Fairgrounds. Small does not mean underwhelming here. This shop really is...
  • Lucky Sporting Goods
    5.00 star(s)
    Honest and Knowledgeable Gun Guy
    I made arrangements to go out to Banks, Oregon to purchase a 300 Blackout rifle Jeremy built. It seemed to be exactly what I was looking for and...
  • Gooseneck Road
    4.00 star(s)
    8/1/2020
    We went there today, at the righthand fork past the shooter info sign, and at the spot where there's a fallen log across a trail; good backstop...
Top Bottom