Aimpoint SOLD

Not open for further replies.
Feedback: 64 / 1 / 0
NIB (New In Box)

Aimpoint CS Red Dot Sight 26mm Tube 1x 2 MOA Dot with Integrated Picatinny-Style Mount Matte

Available for the first time in the United States and only at MidwayUSA, the Aimpoint CS red dot sight was developed by Aimpoint to fulfill the needs of the Swedish Armed Forces. The Aimpoint CS can be used on most firearms supporting a Picatinny rail. Like all Aimpoint sights, the CS sight is rugged and reliable, though it differs from the Aimpoint CompM and CompML series on several features. The Aimpoint CS sight uses a fixed AA battery which together with the Aimpoint CET diode has an incredible runtime of 80,000 hours (more than 9 years) on the highest daytime setting. That is 79,000 hours more than the nearest competitor using the same battery. The rugged rubber surface protects the sight from shocks and adds an additional stealth factor. On top of the sight, an integrated Picatinny rail system allows the mounting of a laser device, tactical light or similar devices. Back-up iron sights are integrated on top of the sight. If you have been looking for something different that no one else has, this is it. This Aimpoint CS is one of the most unique sights ever offered, and it won't be around for long. Get yours before it is too late, quantities are extremely limited.

Technical Information: Aimpoint CS

Optical Magnification: 1x, unlimited eye relief
Battery Type: One 3.6 Volt, AA-size, Lithium battery
Battery Life: 10 years continuous use on setting 13 out of 16
Housing: Extruded, high strength aluminum, hard anodized, black, non-glare finish. Sight body is protected by a rubber cover, matte black.
Mount: Mounts to MIL-STD 1913 Rail System "Picatinny Rail" by means of two clamps and nuts
Temperature Range, Operating: -50 degrees F to +160 degrees F
Immersion: Immersible to 33 feet
Dimensions (L x W x H): 5.1" x 2.6" x 2.7", including lens covers
Weight: 13.8 oz
Dot Brightness: 16 settings - 7 NVD, 8 Daylight and 1 Extra Bright (for use together with laser protection goggles)
Optical Coating: Anti reflex, 1st, 2nd and 3rd Generation NVD compatible

# No tools are required to zero the sight.
# A killFlash anti-reflection device is included. It can be removed by flipping it out of the lens cover.

Not open for further replies.


Miller's Quarry Clean-Up
Miller's Quarry
Miller Rd, Mt Hood Village, OR 97067, USA
Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
Oregon State Steel Challenge Championship
Central Oregon Shooting Sports Association
Millican, OR 97701, USA
DRRC .22 Rimfire Challenge Oct 10
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA


  • Triple B Guns
    5.00 star(s)
    Triple B Guns
    This isn't really a review as we own the store but rather an invitation to come down and visit us. We specialize in hard to find unique guns but...
  • J&B Firearm Sales
    5.00 star(s)
    Good local shop
    Picked up a rifle yesterday from J&B. This was the second or third gun purchase over the last few years from them. I always enjoy stopping by...
  • H&K Gun Shop
    5.00 star(s)
    The only place I have found 9mm in stock
    I’ll admit I didn’t even know this place existed, as I don’t tend to go into Forest Grove often. But it’s a giant (looks bigger from the...
  • Revelation Arms
    4.00 star(s)
    Depends who answers the phone
    I was given the number to Roger Loock by Beaver Creek Armory, as I needed parts I had ordered from MCarbo installed on a Kel-Tec Sub2000. On my...
  • Coastal Farm & Ranch - Cornelius
    3.00 star(s)
    Lesson learned
    I’ll take some responsibility here, as I took the employee at their word instead of doing a thorough inspection. Short story is that I asked for a...
Top Bottom