- Messages
- 285
- Reactions
- 315
- Ad Type
- For Sale
- For Trade
- Price
- $1300
- Manufacturer
- Other / Not Listed
- City
- RIDGEFIELD
- State
- Washington
- Zip Code
- 98642
**I WILL NOT PART OUT**
**I WILL NOT PART OUT**
**I WILL NOT PART OUT**
With that out of the way, if you ask me to part out the lot, yes, I will. Each piece is $1300 OBO (the same price as the lot...go figure)
Well, with this being illegal come July, might as well part with it.
Have the stealth arms jig which was used to build one 1911. The frames are both from Stealth Arms.
Have just about everything needed to build a 1911 Government in 45acp (Though you will need the beavertail tool for fitting, and the hole drill jig for the frames) with the internals being from Ed Brown (minus beavertail which is wilson combat).
Second build is a Commander 1911 and has a mix of Ed Brown and wilson combat and a few other name brands. Never found a slide for it, so that will be the one large piece missing. This is not a complete build, as there a still a few other pieces needed. I would say its about 75% complete.
Here is a list of most of the parts (I took the time to lookup everything. The prices listed were the cheapest I could find from reputable websites{midway, brownells, opticsplanet, ed brown, wilson combat):
Stealth Arms:
80% 1911 Tactical Government Frame in 45ACP - $172
80% 1911 Tactical Commander Frame in 45ACP - $172
Matrix Precision Rail Cutter and Barrel Seat Cutter - $199
Ed Brown parts:
9243-45: 4.25" Drop-in Match Barrel (Commander model) - $185
925-45: Full Size Drop-In Match Barrel (Government model) - $185
814-S: Rebuild kit - $19.95
889: Two-Piece Guide Rod Assembly - $29.95
908: Heavy Duty Firing Pin Spring - $4.95
824: Heavy Duty 45 ACP Firing Pin - $9.95
893-T: Ambidextrous Thumb Safety - $64.95
874: Perfection Sear - $32.95
955: Adjustable Rear Night Sight - $75.95
1302: 1911 Extractor - $29.95
897: Barstock Hammer - $69.95
820-S: Firing Pin Stop - $14.95
811-M: Perfection Disconnector - $24.95
823-P: Perfection Hammer Strut - $16.95
821-S: Plunger Tube - $18.95
Wilson Combat:
298SBP: Beavertail Grip Safety - $75.95
31T: Magazine Release - $24.95
148: Two-Piece Guide Rod – $31.95
Other parts:
Novak's White Dot Front Sight - $31.99
Wolff Spring Kit
STI Trigger - $39.99
Unmarked Mainspring Housing
Sig Sauer 1911 SST Slotted Hammer - $54.95
Various Grip sets for normal and thin grips
Sear Springs
Unmarked Stainless Magazine release
Unmarked Rebuild Kit
Hammer Strut
Recoil Spring Guide
Grips
Safety
Unknown Stainless-Steel Slide for 45ACP with Bomar cut sights
Price is $1300 OBO (the total amount for just the stuff with listed prices is $1564.09....so as you can see, already taking a loss)
I'm open to all firearm trades, and Dillon reloading stuff
**I WILL NOT PART OUT**
**I WILL NOT PART OUT**
With that out of the way, if you ask me to part out the lot, yes, I will. Each piece is $1300 OBO (the same price as the lot...go figure)
Well, with this being illegal come July, might as well part with it.
Have the stealth arms jig which was used to build one 1911. The frames are both from Stealth Arms.
Have just about everything needed to build a 1911 Government in 45acp (Though you will need the beavertail tool for fitting, and the hole drill jig for the frames) with the internals being from Ed Brown (minus beavertail which is wilson combat).
Second build is a Commander 1911 and has a mix of Ed Brown and wilson combat and a few other name brands. Never found a slide for it, so that will be the one large piece missing. This is not a complete build, as there a still a few other pieces needed. I would say its about 75% complete.
Here is a list of most of the parts (I took the time to lookup everything. The prices listed were the cheapest I could find from reputable websites{midway, brownells, opticsplanet, ed brown, wilson combat):
Stealth Arms:
80% 1911 Tactical Government Frame in 45ACP - $172
80% 1911 Tactical Commander Frame in 45ACP - $172
Matrix Precision Rail Cutter and Barrel Seat Cutter - $199
Ed Brown parts:
9243-45: 4.25" Drop-in Match Barrel (Commander model) - $185
925-45: Full Size Drop-In Match Barrel (Government model) - $185
814-S: Rebuild kit - $19.95
889: Two-Piece Guide Rod Assembly - $29.95
908: Heavy Duty Firing Pin Spring - $4.95
824: Heavy Duty 45 ACP Firing Pin - $9.95
893-T: Ambidextrous Thumb Safety - $64.95
874: Perfection Sear - $32.95
955: Adjustable Rear Night Sight - $75.95
1302: 1911 Extractor - $29.95
897: Barstock Hammer - $69.95
820-S: Firing Pin Stop - $14.95
811-M: Perfection Disconnector - $24.95
823-P: Perfection Hammer Strut - $16.95
821-S: Plunger Tube - $18.95
Wilson Combat:
298SBP: Beavertail Grip Safety - $75.95
31T: Magazine Release - $24.95
148: Two-Piece Guide Rod – $31.95
Other parts:
Novak's White Dot Front Sight - $31.99
Wolff Spring Kit
STI Trigger - $39.99
Unmarked Mainspring Housing
Sig Sauer 1911 SST Slotted Hammer - $54.95
Various Grip sets for normal and thin grips
Sear Springs
Unmarked Stainless Magazine release
Unmarked Rebuild Kit
Hammer Strut
Recoil Spring Guide
Grips
Safety
Unknown Stainless-Steel Slide for 45ACP with Bomar cut sights
Price is $1300 OBO (the total amount for just the stuff with listed prices is $1564.09....so as you can see, already taking a loss)
I'm open to all firearm trades, and Dillon reloading stuff
Last Edited:
